Not located any fasteners for removal on a laptop.
Not located any fasteners for removal on a laptop.
You're having trouble locating the screws on the bottom panel of your laptop. It sounds like you might need to check the mounting points for screws instead of trying to remove them directly. Also, make sure you're using the correct type of screws for the specific model. If you're unsure, it could help to look up the exact screw specifications for this particular laptop model.
It seems the plastic clips on the case halves can be released by inserting a guitar pick between them and sliding until they snap. You might also find screws beneath the rubber feet, especially if your laptop has them. An iFixIt tutorial for your laptop could explain how to remove the bottom cover.
I’m mainly worried about the battery being difficult to take out, similar to older laptops. The machine is off, and I don’t have a compatible charger, so I’ll be extra cautious while handling it.
I removed one of the rubber feet to check for hidden screws. I noticed a screw, but I’m unsure which type of screwdriver would work best to remove it.
Not a screw, probably injection moulding. Most recent HP laptops use M2x2.5 screws everywhere (fewer parts, easier assembly, reduces chances of accidental damage from incorrect fasteners). Clips secure the panel, typically opening at hinges and releasing clips individually. The clips can securely hold the panel by themselves (I own a Pavilion that relies solely on this method). Varying on the model: battery extraction might be as straightforward as pulling out the plug (Pavilion) or more challenging involving gently moving sideways with a plastic tool to firmly press it against the battery (Victus).
This laptop functions like a satellite. I was able to open it without much trouble, only lightly cleaning the CPU fan for dust accumulation, which was actually minimal.