Not all items display content immediately.
Not all items display content immediately.
Typically this process involves the bios button and USB connection, which is easiest to verify by following your manual precisely. Ensure you complete each step as instructed. If issues persist, consider contacting a professional for an updated bios. Confirm your flash drive is on the correct flash drive label—avoid using the update version name. Verify the USB port matches the labeled bios port. Set the drive to Fat32 and place it as the sole file. Press and hold the bios button with the drive connected for roughly five seconds, then release. The back light and any RGB indicators should activate, and the board may shut down after about 20 minutes if the update completes successfully.