F5F Stay Refreshed Hardware Desktop None of the RAM sticks function after trying to add more memory.

None of the RAM sticks function after trying to add more memory.

None of the RAM sticks function after trying to add more memory.

Pages (2): 1 2 Next
A
AnnAMaria16
Junior Member
14
02-04-2021, 07:32 AM
#1
I checked your setup and the issues are likely related to memory compatibility. The new RAM doesn’t match the existing slots, causing the boot error. Try removing the current sticks and installing the new ones in the same positions. If the problem persists, consult your motherboard manual for replacement procedures.
A
AnnAMaria16
02-04-2021, 07:32 AM #1

I checked your setup and the issues are likely related to memory compatibility. The new RAM doesn’t match the existing slots, causing the boot error. Try removing the current sticks and installing the new ones in the same positions. If the problem persists, consult your motherboard manual for replacement procedures.

T
TheCoolNerd
Member
73
02-04-2021, 08:03 AM
#2
Sicher, startet alles von vorne. Willkommen im Forum!
T
TheCoolNerd
02-04-2021, 08:03 AM #2

Sicher, startet alles von vorne. Willkommen im Forum!

T
TinoBanana
Member
177
02-04-2021, 12:28 PM
#3
I succeeded but nothing altered.
T
TinoBanana
02-04-2021, 12:28 PM #3

I succeeded but nothing altered.

X
xRedxNightx
Member
176
02-06-2021, 09:41 PM
#4
Considered a wild suggestion to exchange the new ones for the old ones. It worked wonders for me when the sticks didn’t match.
X
xRedxNightx
02-06-2021, 09:41 PM #4

Considered a wild suggestion to exchange the new ones for the old ones. It worked wonders for me when the sticks didn’t match.

T
TryHardMikel
Member
172
02-07-2021, 12:02 AM
#5
I've already tested every stick in each slot, but it didn't change anything.
T
TryHardMikel
02-07-2021, 12:02 AM #5

I've already tested every stick in each slot, but it didn't change anything.

X
xEIgoldo
Member
219
02-07-2021, 07:15 PM
#6
Are the new sticks sufficient by themselves? If not, revert to the previous ones...
X
xEIgoldo
02-07-2021, 07:15 PM #6

Are the new sticks sufficient by themselves? If not, revert to the previous ones...

C
CloseToToast
Member
125
02-08-2021, 10:24 AM
#7
I attempted to insert the new components individually, which triggered code 53. Then I reverted to the older sticks, but they still produced code 53 in the same slots as before.
C
CloseToToast
02-08-2021, 10:24 AM #7

I attempted to insert the new components individually, which triggered code 53. Then I reverted to the older sticks, but they still produced code 53 in the same slots as before.

L
LKMJedi
Member
69
02-09-2021, 01:07 PM
#8
Switch the PSU, clear CMOS, then keep the power button pressed until the PC stops making any noise while trying to boot. Press it a few times, hold for about 20 seconds, and after confirming power is gone, try again... (keep all sticks in)
L
LKMJedi
02-09-2021, 01:07 PM #8

Switch the PSU, clear CMOS, then keep the power button pressed until the PC stops making any noise while trying to boot. Press it a few times, hold for about 20 seconds, and after confirming power is gone, try again... (keep all sticks in)

F
Froggy0225
Junior Member
21
02-10-2021, 03:21 PM
#9
Still nothing altered.
F
Froggy0225
02-10-2021, 03:21 PM #9

Still nothing altered.

P
Pedronoma12
Junior Member
7
03-04-2021, 12:53 PM
#10
Use one old stick in each position, one by one. Turn off the power and press the power button to restart between moves. It’s possible a faulty slot exists. Dust on the motherboard could also cause issues. Try removing it with compressed air and check if that improves things.
P
Pedronoma12
03-04-2021, 12:53 PM #10

Use one old stick in each position, one by one. Turn off the power and press the power button to restart between moves. It’s possible a faulty slot exists. Dust on the motherboard could also cause issues. Try removing it with compressed air and check if that improves things.

Pages (2): 1 2 Next