F5F Stay Refreshed Hardware Desktop No, your GPU isn't saying goodbye. It's functioning normally unless you're experiencing specific issues.

No, your GPU isn't saying goodbye. It's functioning normally unless you're experiencing specific issues.

No, your GPU isn't saying goodbye. It's functioning normally unless you're experiencing specific issues.

Pages (3): Previous 1 2 3 Next
B
Broflash
Senior Member
740
07-11-2020, 03:35 AM
#11
The entire log is limited by performance at the highest operating voltage. This aligns with the significant undervolt present, which naturally leads to instability.
B
Broflash
07-11-2020, 03:35 AM #11

The entire log is limited by performance at the highest operating voltage. This aligns with the significant undervolt present, which naturally leads to instability.

C
Cornettt
Member
66
07-15-2020, 02:30 AM
#12
Consider raising the voltage. You already checked standard configurations and found no improvement, so adjusting the core clock and boosting fan speed might help.
C
Cornettt
07-15-2020, 02:30 AM #12

Consider raising the voltage. You already checked standard configurations and found no improvement, so adjusting the core clock and boosting fan speed might help.

D
63
07-17-2020, 12:19 AM
#13
What caused the most damage?
D
derbydestroyer
07-17-2020, 12:19 AM #13

What caused the most damage?

P
Papyrule
Senior Member
560
07-17-2020, 09:08 AM
#14
It began failing more quickly than before and occasionally during startup. Reducing the clock speed resolved the problem temporarily, but now it’s happening again.
P
Papyrule
07-17-2020, 09:08 AM #14

It began failing more quickly than before and occasionally during startup. Reducing the clock speed resolved the problem temporarily, but now it’s happening again.

M
mikeinsaw
Member
162
07-17-2020, 09:38 PM
#15
I tried an RTX 2070 Ti from a friend today, and it worked flawlessly without using the afterburner.
M
mikeinsaw
07-17-2020, 09:38 PM #15

I tried an RTX 2070 Ti from a friend today, and it worked flawlessly without using the afterburner.

S
sage12901
Member
146
07-21-2020, 11:54 AM
#16
Restore everything to its original state. I didn’t catch this message before. Excuse me. We might also try DDU. Seeing a B450 indicates this isn’t the first graphics card installed here. https://www.guru3d.com/files-details/dis...nload.html Get DDU, boot your PC in safe mode, delete all graphics drivers, then restart normally. Download the driver installer from NVIDIA instead of GeForce Experience. https://www.nvidia.com/en-us/geforce/drivers/ Keep older versions, like 522.25 or 517.48. Recent NVIDIA updates have caused some issues. Install those and check if the problem persists. If it continues, it could mean a faulty GPU or VRM. Run OCCT’s GPU VRAM test and the GPU diagnostic while you begin the warranty claim. https://www.ocbase.com/download
S
sage12901
07-21-2020, 11:54 AM #16

Restore everything to its original state. I didn’t catch this message before. Excuse me. We might also try DDU. Seeing a B450 indicates this isn’t the first graphics card installed here. https://www.guru3d.com/files-details/dis...nload.html Get DDU, boot your PC in safe mode, delete all graphics drivers, then restart normally. Download the driver installer from NVIDIA instead of GeForce Experience. https://www.nvidia.com/en-us/geforce/drivers/ Keep older versions, like 522.25 or 517.48. Recent NVIDIA updates have caused some issues. Install those and check if the problem persists. If it continues, it could mean a faulty GPU or VRM. Run OCCT’s GPU VRAM test and the GPU diagnostic while you begin the warranty claim. https://www.ocbase.com/download

J
JudgeSansDredd
Junior Member
6
07-22-2020, 10:08 AM
#17
It’s fine I’m glad you’re giving the time. I tried all the above but something is weird with occt. A pparently vram crashes in the first test withen 3 seconds after relaunching occt. If I test vram again without closing the app, it will run ok without crashes so I’m not sure what to make of it. However, this only happens when testing vram, other components are doing well everytime.
J
JudgeSansDredd
07-22-2020, 10:08 AM #17

It’s fine I’m glad you’re giving the time. I tried all the above but something is weird with occt. A pparently vram crashes in the first test withen 3 seconds after relaunching occt. If I test vram again without closing the app, it will run ok without crashes so I’m not sure what to make of it. However, this only happens when testing vram, other components are doing well everytime.

H
HubixCube
Member
166
07-29-2020, 11:55 AM
#18
You're experiencing numerous issues during GPU testing on OCCT. The temperatures are rising, yet the fans seem inactive. This could indicate a problem with cooling or thermal management.
H
HubixCube
07-29-2020, 11:55 AM #18

You're experiencing numerous issues during GPU testing on OCCT. The temperatures are rising, yet the fans seem inactive. This could indicate a problem with cooling or thermal management.

P
PheonixMMC
Member
174
08-04-2020, 08:49 AM
#19
It's time to complete your warranty documentation.
P
PheonixMMC
08-04-2020, 08:49 AM #19

It's time to complete your warranty documentation.

T
tomtomjumbo
Member
188
08-04-2020, 12:45 PM
#20
Well, it seems I’m out of luck here. Time to spend what I have. Thanks for your support.
T
tomtomjumbo
08-04-2020, 12:45 PM #20

Well, it seems I’m out of luck here. Time to spend what I have. Thanks for your support.

Pages (3): Previous 1 2 3 Next