No, you shouldn't use hot glue on a CPU pin. It can damage the component and cause further issues.
No, you shouldn't use hot glue on a CPU pin. It can damage the component and cause further issues.
farazofbuscus
01-09-2020, 08:48 PM #1Hi everyone. I recently discovered my first computer and had to take it apart many years ago. I managed to adjust several pins, straightening about 30 of them, though one broke when I bent it. I’m not sure if hot gluing will work since the CPU is tightly seated in the socket. My backup idea is to cover the pins with a small piece of solder and reattach it using tweezers. Any suggestions or alternative methods would be great! Thanks in advance.
_iTofuYou_
01-10-2020, 08:25 AM #2You can use hot glue to secure it, but it doesn't guarantee success. Verify the pin arrangement to confirm it's a critical pin. Occasionally you might encounter a dead memory DIMM or channel, or if lucky, a broken GND pin—generally it's okay.
Metal_Blox
01-10-2020, 12:28 PM #3I’m checking the details. It’s an older Intel model with an IDE motherboard, around 2004. I’m not sure if I’ll locate anything, but I appreciate the help.
firestorm22
01-10-2020, 12:51 PM #4It might seem simpler to just solder normally, but this method offers a quicker solution. The alternative involves a brief contact between components, which can be faster and more efficient.
stampy1nose
01-17-2020, 04:57 AM #6I don’t have a good soldering iron, it looks more difficult and awkward as I am, so I’m worried I’ll end up with even more pins stuck down
sCx_Batman
01-19-2020, 01:43 PM #8If you're unsure about doing it yourself, avoid soldering it and get help from a professional instead.
AvulcanLogic00
01-19-2020, 02:10 PM #9Which processor model are we discussing? If it's quite outdated, you might want to consider a replacement that will function properly.
diamondswordjo
01-19-2020, 09:22 PM #10I'm not in a rush, just hoping to learn from any mistakes with my main