No, you don't need both.
No, you don't need both.
We connect via Genexis through the genexis unit, which then links to the Technicolor TG582N. The Technicolor was supplied by the ISP when we moved in, but it seems separate from the Genexis setup. Both devices aren’t identical—Genexis handles the internet connection while the Technicolor manages the local mesh network. The Genexis provides up to 500 Mbps, whereas the Technicolor only supports 100 Mbps, which is limiting our speed. We have WiFi on the Technicolor, but it’s unclear if the Genexis also supports it, possibly explaining why we use the Genexis instead of the Technicolor directly. Since we’re switching to a mesh system, removing the Technicolor should let us fully use the available bandwidth.
Without knowing the Genexis model, it's difficult to determine the exact setup. It might be a simple modem, requiring the TG582N for essential tasks like routing and NAT. If it functions as a router/modem combo, you can skip the TG582N. Try identifying the Genexis model by checking ports or using its interface. If unsuccessful, test connecting multiple devices to see if they access the internet together. This suggests a router/modem unit, allowing you to swap in a different Gigabit router. Log into the TG582N, record its WAN settings, and match them on your replacement device. Remember any ISP credentials needed for the new router.
You can test the connection by simply connecting to the mesh system from the Genexis without any additional setup. There should be no configuration required unless specific settings are needed for compatibility.