No, there isn't a noticeable performance difference between a RAM set and two separate single sticks of the same kind.
No, there isn't a noticeable performance difference between a RAM set and two separate single sticks of the same kind.
Hello, welcome! Your question about upgrading your Framework 16" with 96GB of DDR RAM is important. Since the special CL46 Kit from Micron isn't available yet, you've opted for two 48GB Sticks (CT48G56C46S5). This choice might affect performance compared to using a dedicated kit. It's worth noting that having separate sticks can sometimes offer more flexibility, but it may also mean slightly lower overall efficiency. Let me know if you need further clarification!
they don't always work well together, which typically means slower performance. But you're welcome to give it a shot since they might still function perfectly. A kit just ensures the sticks are properly matched for compatibility.
There's no physical difference between a stick in a dual channel kit and a stick bought on its own. Sticks in a kit come from the same batch, so they have the same clock speed, timing and ICs. This means they should always be able to work in dual channel mode. If you buy two separate sticks from the same vendor, even with the same specs, they could have different ICs, which could prevent them from running in dual channel at the rated speeds. Most likely it'll be fine, but there's a slim chance it isn't.
There could be significant variations in IC performance across batches, causing differences in speed ratings. This might happen because manufacturing processes or material quality change slightly between batches. It’s possible these small shifts affect how well the chips operate as expected.
They're taking precautions. It might fail in an extremely unlikely situation. I've seen separate purchases often don't perform well either. My DDR5 in 2 kits runs smoothly with Expo, but they still can't guarantee 100% reliability even at 99.999999%.
Manufacturers tend to purchase the cheapest RAM chips available that day. Besides speed and latency, there may be other variations not shown on the specifications that could affect performance. If the units aren't from the same production run, you might encounter issues where differences become significant. Although the probability is low, it's not zero. They should still function in dual-channel mode, but instead of a higher rate like 6000 MT/s, it might drop to around 5600 MT/s. As mentioned by @Dedayog, it's a minor risk worth considering.