No, the R5 2600 supports up to 2GB of RAM, not 3600MHz.
No, the R5 2600 supports up to 2GB of RAM, not 3600MHz.
Your device only supports a frequency of 2933mhz, which isn't available in stock. Consider the 3200mhz model instead and be prepared to downclock it. You could also try the 3600mhz option, though you might discover more affordable RAM at slower speeds.
I’d strongly advise against it. Most 1000/2000 series Ryzen processors didn’t last past 3000. Just turn on XMP, lower the clock to 2933, and it’ll still run fine. I’d recommend getting a 3000/3200 model instead—it’s more affordable and could offer better performance options like a 2x16 3200 setup depending on your location.
Varies based on tuning approach—adjusting VOSC and other voltage settings that support the IMX, possibly relaxing RAM timings like TRFC for boards with high IMC demands. Light RAM configurations also assist, as do key components such as crucial ballistix with 8Gb/s to 16Gb/s revisions on boards with rev 4x8 and Ryzen 1000. The specific board choice isn’t critical since the IMC will dominate performance; just pick any layout (daisy chain or T-Top) it matters not so much.
I would simply apply the xmp profile that adjusts the clock speed to 2933, right? Thanks for bringing up the simple question.
3600 is not a good sign. The number 2933 "and above" relies on many variables. 1.37v 16-18-18-36 2933mhz