No señal en la nueva instalación

F5F Stay Refreshed Hardware Desktop No señal en la nueva instalación

No señal en la nueva instalación

No señal en la nueva instalación

S

SinGor
Member

58

06-03-2019, 07:19 AM

#1

Hello everyone, I recently installed a new build with an ASUS x570 Tuf Wi-Fi, 3700x, Patriot 4400MHz RAM and a Gigabyte RX5700XT OC. The issue is that I’m not getting a boot, the system keeps looping without any display signal. After swapping out my RX5700XT and replacing my GTX1070, everything functions properly on my old rig. What could be causing this problem? I just updated the BIOS and haven’t tried it yet. I wanted to confirm what’s wrong. By the way, I have a Corsair 750W PSU.

S

SinGor

06-03-2019, 07:19 AM #1

Hello everyone, I recently installed a new build with an ASUS x570 Tuf Wi-Fi, 3700x, Patriot 4400MHz RAM and a Gigabyte RX5700XT OC. The issue is that I’m not getting a boot, the system keeps looping without any display signal. After swapping out my RX5700XT and replacing my GTX1070, everything functions properly on my old rig. What could be causing this problem? I just updated the BIOS and haven’t tried it yet. I wanted to confirm what’s wrong. By the way, I have a Corsair 750W PSU.

C

Craftery
Member

207

06-17-2019, 03:53 PM

#2

Did you make sure the monitor was linked to the GPU, not the motherboard? That’s a frequent error.

C

Craftery

06-17-2019, 03:53 PM #2

Did you make sure the monitor was linked to the GPU, not the motherboard? That’s a frequent error.

_

_TeamofLegend_
Junior Member

26

06-25-2019, 09:21 AM

#3

Use a different PCIe port. Reset the CMOS. Also, verify that the monitor is linked to the GPU, not the motherboard.

_

_TeamofLegend_

06-25-2019, 09:21 AM #3

Use a different PCIe port. Reset the CMOS. Also, verify that the monitor is linked to the GPU, not the motherboard.

F

funniegame1
Member

192

06-26-2019, 10:45 AM

#4

I definitely use the GPU, I checked all DP ports and the HDMI port.

F

funniegame1

06-26-2019, 10:45 AM #4

I definitely use the GPU, I checked all DP ports and the HDMI port.

F

frog2go
Junior Member

7

06-27-2019, 10:55 AM

#5

I only used the PCIe slot that supports the GTX 1070

F

frog2go

06-27-2019, 10:55 AM #5

I only used the PCIe slot that supports the GTX 1070

A

Asmeu
Junior Member

28

06-29-2019, 04:54 PM

#6

Run the required steps to proceed. Consider resetting CMOS if needed.

A

Asmeu

06-29-2019, 04:54 PM #6

Run the required steps to proceed. Consider resetting CMOS if needed.