No salida después de usar DDU
No salida después de usar DDU
In short, I was replacing my GPU and thought updating drivers would help. I used ddu, started in safe mode, removed the drivers, but now nothing shows on the screen. I’m blaming myself—I should have been more careful. My motherboard isn’t an option since I have an RX 5600 XT. I also have an RX 6700 XT and an MSI B550 Gaming Edge Wi-Fi. I’m on Windows 10 64-bit. I really wish there was a way to fix this or undo it. Thanks for your time.
Even the boot screen is missing? That suggests a different issue. Could be related to the power supply unit. I’d attempt to detach the GPU and shut down the PSU. Then remove the CMOS battery for five minutes before trying again with another card. If that doesn’t help, test the cards on another machine or use a different PSU.
It occurred during upgrades from GTX 980 to GTX 1080, then again with the RX6700XT. The issue was with the ports—HDMI and DP failed, but DVI worked consistently. I connected via a DVI-D to HDMI cable and installed the proper drivers. If possible, try that; otherwise, test HDMI or DP, depending on what hasn't been tried yet.
Do you receive a signal in BIOS? If yes, verify the CSM setting since it may clash with both GPUs; Windows usually shows the standard adapter but in extreme cases you might need to reinstall.