F5F Stay Refreshed Hardware Desktop No response during initial startup.

No response during initial startup.

No response during initial startup.

T
THioRy_IMBA
Junior Member
Find
29
10-07-2023, 04:19 PM
#1
Hello, I recently assembled a new PC with a 7800x3d ASRock B650 Pro RX Wifi 2x16 DDR5 RAM stick and a Wi-Fi card. Currently, there’s no signal detected. I’ve tried various monitors, updated BIOS, reinstalled CMOS, used the RAM stick trick, and even ran it for 30 minutes thinking it was memory training, but nothing happened. There are two red LEDs on the board, but I can’t access the settings menu. I’m feeling a bit stuck and need some guidance. Thanks!
Reply
Reply
T
THioRy_IMBA
10-07-2023, 04:19 PM #1

Hello, I recently assembled a new PC with a 7800x3d ASRock B650 Pro RX Wifi 2x16 DDR5 RAM stick and a Wi-Fi card. Currently, there’s no signal detected. I’ve tried various monitors, updated BIOS, reinstalled CMOS, used the RAM stick trick, and even ran it for 30 minutes thinking it was memory training, but nothing happened. There are two red LEDs on the board, but I can’t access the settings menu. I’m feeling a bit stuck and need some guidance. Thanks!

Reply
Reply
E
eduardodd08
Posting Freak
Find
852
10-09-2023, 05:12 PM
#2
Two of the four LEDs are lit. Consider repositioning the CPU and RAM.
Reply
Reply
E
eduardodd08
10-09-2023, 05:12 PM #2

Two of the four LEDs are lit. Consider repositioning the CPU and RAM.

Reply
Reply
A
Azastias
Member
Find
223
10-09-2023, 11:07 PM
#3
Ensure all RAM modules are securely seated after reinstalling. Initially, I attempted to fix a system that failed to start for four hours, only to discover the problem was improperly inserted with the sticks halfway in.
Reply
Reply
A
Azastias
10-09-2023, 11:07 PM #3

Ensure all RAM modules are securely seated after reinstalling. Initially, I attempted to fix a system that failed to start for four hours, only to discover the problem was improperly inserted with the sticks halfway in.

Reply
Reply
C
cgibb21
Member
Find
72
10-17-2023, 01:52 AM
#4
No indication upon startup? It might look like this: You attempt to power on the PC, it fails to respond, you power it down, restart it, and it works again.
Reply
Reply
C
cgibb21
10-17-2023, 01:52 AM #4

No indication upon startup? It might look like this: You attempt to power on the PC, it fails to respond, you power it down, restart it, and it works again.

Reply
Reply
M
MBpvpEXPERT
Junior Member
Find
17
10-23-2023, 07:33 AM
#5
Replacing the CPU resolved the issue. It seems a CPU pin wasn't making proper contact with the motherboard, which led to the CPU and DRAM lights appearing. Thanks for the guidance.
Reply
Reply
M
MBpvpEXPERT
10-23-2023, 07:33 AM #5

Replacing the CPU resolved the issue. It seems a CPU pin wasn't making proper contact with the motherboard, which led to the CPU and DRAM lights appearing. Thanks for the guidance.

Reply
Reply
K
KhaleDx
Junior Member
Find
41
10-25-2023, 04:29 AM
#6
No, I wasn't receiving any response whether I turned it off or tried again after waiting.
Reply
Reply
K
KhaleDx
10-25-2023, 04:29 AM #6

No, I wasn't receiving any response whether I turned it off or tried again after waiting.

Reply
Reply
A
Aruan_Vargas
Member
Find
233
10-28-2023, 07:16 PM
#7
But then it appeared or did I misinterpret your title?
Reply
Reply
A
Aruan_Vargas
10-28-2023, 07:16 PM #7

But then it appeared or did I misinterpret your title?

Reply
Reply