No output shown on screen.
No output shown on screen.
This new PC setup is not showing up. Everything appears brand new, and no error lights remain active. I tested it with the GPU while using dual RAM in A2 and B2 slots. Only RAM in A2 and B2 was active, and I cleared the CMOS (though I’m not sure if that was done correctly). Updated the BIOS several times—once using a stick and once via USB—and held the flash bios button for 30 seconds, which lit up the SSD. I ran it through Windows with a USB drive and kept it running for minutes in each configuration. The CPU fans weren’t spinning, cables were secure, RAM was re-seated, and I even used a different Windows version. The replacement display didn’t work either. I’m really frustrated, having built about a dozen PCs before this one. Hopefully, someone else has solved this issue. Thanks for any suggestions!