No output or information displayed and no USB connection after the BIOS update.
No output or information displayed and no USB connection after the BIOS update.
Fixed it. Thanks for the support. This is how... Take the PC of the power, remove everything from the motherboard, CPU, GPU, mem, fans, storage, leave nothing on there exept power to the motherboard so the big connector and the 6-pin connector. Download the latest bios file for your board, mind the revision! In my case the Aorus Elite V2 Rev. 1.2 Rename the bios file to GIGABYTE.bin and put it on an USB stick. Put the USB stick in the computer, connect power and push the Q-flash button. (a light should be flashing) Wait a while untill the computer shuts down again. Now add CPU, one stick of RAM and the GPU. Start de computer and you will get the message that everything has been reset and get in the bios.
I tried the same steps and the screen went dark with no signal. My PC is an ASUS Gaming model. The fix I used was removing it completely and restarting it with the BIOS FLBX button pressed along with the power button. After turning it back on, it shut down completely and wouldn’t restart at all. Don’t delay—unplug it for about 10 seconds, then press the BIOS button again and power it on. It should restart properly and give full functionality back. This issue seems to appear when a BIOS update is needed, but you don’t have one available online right now. Hope this helps!