F5F Stay Refreshed Hardware Desktop No new entry added to DOCP. Please try again.

No new entry added to DOCP. Please try again.

No new entry added to DOCP. Please try again.

A
Arcticwolf923
Junior Member
14
05-30-2021, 07:13 AM
#1
Here’s a revised version of your message:

So, the next point is similar. I own: Ryzen 7 3800X, Asus B550-F Gaming Wi-Fi motherboard, EVGA 3070ti, FTW3 graphics card, and G.Skill F4-3200C16D-32GTZN RAM. The RAM won’t overclock, no matter what I try. I checked compatibility and the BIOS update looks good. Both RAM modules are functioning properly, but since this is my third setup, I’m unsure what’s causing the DOCP post issue. I’ve even calculated the correct RAM speed and spent a lot of time adjusting timings without success. I won’t even reach 2400MHz, let alone 3200MHz. I really need some help figuring this out.
A
Arcticwolf923
05-30-2021, 07:13 AM #1

Here’s a revised version of your message:

So, the next point is similar. I own: Ryzen 7 3800X, Asus B550-F Gaming Wi-Fi motherboard, EVGA 3070ti, FTW3 graphics card, and G.Skill F4-3200C16D-32GTZN RAM. The RAM won’t overclock, no matter what I try. I checked compatibility and the BIOS update looks good. Both RAM modules are functioning properly, but since this is my third setup, I’m unsure what’s causing the DOCP post issue. I’ve even calculated the correct RAM speed and spent a lot of time adjusting timings without success. I won’t even reach 2400MHz, let alone 3200MHz. I really need some help figuring this out.

H
hana_heather13
Member
54
05-30-2021, 12:57 PM
#2
It seems you've made a few mistakes with the equipment. For your upcoming project, consider using the F4-3200C14D-32GTZSK instead.
H
hana_heather13
05-30-2021, 12:57 PM #2

It seems you've made a few mistakes with the equipment. For your upcoming project, consider using the F4-3200C14D-32GTZSK instead.

K
KoshaPLAY
Junior Member
9
05-30-2021, 05:01 PM
#3
I understand you prefer the RGB appearance on your PC. Would you like some alternative recommendations? Also, it wasn’t the same set you purchased earlier—you mentioned getting a specific part number from Asus. Since it’s a Ryzen kit, that might explain the compatibility issue.
K
KoshaPLAY
05-30-2021, 05:01 PM #3

I understand you prefer the RGB appearance on your PC. Would you like some alternative recommendations? Also, it wasn’t the same set you purchased earlier—you mentioned getting a specific part number from Asus. Since it’s a Ryzen kit, that might explain the compatibility issue.

I
II_RIPTIDE_II
Member
167
05-30-2021, 06:43 PM
#4
The AMD kit is mainly promotional. The memory chips inside likely come from SK Hynix, which may not integrate smoothly with AMD.
I
II_RIPTIDE_II
05-30-2021, 06:43 PM #4

The AMD kit is mainly promotional. The memory chips inside likely come from SK Hynix, which may not integrate smoothly with AMD.

T
Tarag789
Junior Member
37
05-30-2021, 08:06 PM
#5
Do you have any suggestions for RGB sets? The previous two I tried were Samsung kits, but they didn’t work.
T
Tarag789
05-30-2021, 08:06 PM #5

Do you have any suggestions for RGB sets? The previous two I tried were Samsung kits, but they didn’t work.

M
MrFrit
Junior Member
19
05-31-2021, 03:54 PM
#6
RGB is more expensive... but definitely search for that exact part number. If you find a kit with the same number ending in "C," it's incorrect and may cause problems. Once you receive this kit and encounter issues, let me know and I'll assist with setup.
M
MrFrit
05-31-2021, 03:54 PM #6

RGB is more expensive... but definitely search for that exact part number. If you find a kit with the same number ending in "C," it's incorrect and may cause problems. Once you receive this kit and encounter issues, let me know and I'll assist with setup.

M
MadMar
Member
222
05-31-2021, 05:48 PM
#7
Enable DOCP and set it to 1.4 Volt for your RAM
M
MadMar
05-31-2021, 05:48 PM #7

Enable DOCP and set it to 1.4 Volt for your RAM

S
syoelaap
Junior Member
17
05-31-2021, 06:45 PM
#8
Unsuccessful result. Attempted up to 1.45 but decided not to go further.
S
syoelaap
05-31-2021, 06:45 PM #8

Unsuccessful result. Attempted up to 1.45 but decided not to go further.

N
NGNLxReiga
Member
186
06-02-2021, 12:45 PM
#9
I’m focused on cost, not price. I wasn’t expecting a configuration with reduced latency to be advantageous. I believed higher latency would increase the risk of instability.
N
NGNLxReiga
06-02-2021, 12:45 PM #9

I’m focused on cost, not price. I wasn’t expecting a configuration with reduced latency to be advantageous. I believed higher latency would increase the risk of instability.

C
Char1ie_XD
Senior Member
578
06-04-2021, 07:14 AM
#10
This premium Samsung B-Die setup offers flexibility for various configurations. Replace the RAM and reset the CMOS before initializing the system. After that, restart it and turn on XMP settings.
C
Char1ie_XD
06-04-2021, 07:14 AM #10

This premium Samsung B-Die setup offers flexibility for various configurations. Replace the RAM and reset the CMOS before initializing the system. After that, restart it and turn on XMP settings.