No internet service on my modem.
No internet service on my modem.
The modems listed for my ISP lack QoS support. My Netgear C7000v2 is personal, so adding a router should work for QoS. I can also forward the router’s IP address to the modem, allowing all PCs on the network to access games without strict upload limitations. The current speeds are 300/30 Mbps. I want to prioritize traffic for my PCs over other devices like consoles, phones, and smart TVs. This is because monitoring tools fail to distinguish between upload and download, showing everything as upload. Wireless devices consume most bandwidth, causing noticeable lag during games on titles such as COD, Battlefield, or Apex. I’m looking for a router that behaves like a TP-Link AC5300 in traffic management, though I’m unsure if a powerful model is necessary. There are two PCs and roughly ten devices connected to the Wi-Fi.
Usually you shouldn't enable QoS on a modem; your router handles that. Since you have a modem-router combo, consider switching to a regular modem only if possible.
It seems you might have misunderstood my response. I’m considering moving to a CM700 modem-only device and adding a router afterward. I’d appreciate some guidance on choosing a router until you decide on a new modem. Additionally, I’m hoping to hear back from my ISP regarding the unlimited bandwidth option with Gigabit Internet.
Router-wise, WiFi 5 should work fine. At speeds around 300/30 Mbps, you probably won’t need any QoS settings. If you’re aiming for Gigabit, keep in mind most cable ISPs will likely need a Docsis 3.1 modem, especially Comcast, Cox, and Charter for their gigabit plans. It seems this applies across the board. I’m not sure what your ISP is, but Comcast charges $25 per month for promotions or $50 for unlimited data, or you can use their XFi equipment for $15 per month in some areas.
QoS is a routing capability, not a modem function, which likely explains this. Modems simply transform signals (like changing from a tone to TCP/IP). For DOCSIS 3.0, you usually aim for 3.1, as it’s more supported now and backward compatible. Think about devices like the CM1000 or SB8200. It might seem strange that they can’t separate upload and download, but if someone is running a torrent client, it could be overwhelming your upload speed. Network tools rely on packet capture, identifying whether traffic is going out (Tx) or in (Rx). Are you sure the problem lies with your bandwidth? Also, check if your PC uses Ethernet or Wi-Fi—Wi-Fi devices might compete for wireless bandwidth, causing latency spikes from queued packets, not QoS to fix.
I'm considering the CM1000 or 1200 and want to confirm unlimited package availability with Gigablast. Previously, I heard it wasn't offered. Also, I need to know the upload speed limit—someone mentioned it's 960/10 Mbps.