F5F Stay Refreshed Hardware Desktop No interface appears during startup of the latest version.

No interface appears during startup of the latest version.

No interface appears during startup of the latest version.

F
Fumii_
Member
58
07-05-2022, 12:30 PM
#1
After powering on the CPU for the first boot, the debug indicator remained illuminated and displayed green. There was no video output and no method to access BIOS settings. I performed a BIOS flash update to the latest version. Attempted to use a functional GPU from another system, but it still showed no display. Tested both DisplayPort and HDMI connections on the GPU and motherboard. Experimented with different RAM configurations in various slots. Cleared CMOS. Still stuck and feeling frustrated. It appears the device should show an option to enter BIOS Part Configuration on the build: Ryzen 5 7600x Deepcool ak400 Msi Pro B650-P wifi Patriot viper DDR5 2x8 5200mhz Crucial P3 Plus 1TB PCIe 4.0 Asrock phantom gaming Radeon rx6800 Thermaltake touphpower GF1 750W.
F
Fumii_
07-05-2022, 12:30 PM #1

After powering on the CPU for the first boot, the debug indicator remained illuminated and displayed green. There was no video output and no method to access BIOS settings. I performed a BIOS flash update to the latest version. Attempted to use a functional GPU from another system, but it still showed no display. Tested both DisplayPort and HDMI connections on the GPU and motherboard. Experimented with different RAM configurations in various slots. Cleared CMOS. Still stuck and feeling frustrated. It appears the device should show an option to enter BIOS Part Configuration on the build: Ryzen 5 7600x Deepcool ak400 Msi Pro B650-P wifi Patriot viper DDR5 2x8 5200mhz Crucial P3 Plus 1TB PCIe 4.0 Asrock phantom gaming Radeon rx6800 Thermaltake touphpower GF1 750W.

T
therbom
Junior Member
48
07-05-2022, 01:31 PM
#2
Ensure the LED is green. Verify or possibly reinsert the NVMe connection. If needed, consider using a SATA drive instead to test.
T
therbom
07-05-2022, 01:31 PM #2

Ensure the LED is green. Verify or possibly reinsert the NVMe connection. If needed, consider using a SATA drive instead to test.

E
EasyFridays
Member
65
07-05-2022, 02:43 PM
#3
Used a SATA drive from my main system. Connected it with the NVMe removed. Also tried inserting the NVMe into the second M.2 slot. Still no improvement, video output remains absent and the boot debug light stays on.
E
EasyFridays
07-05-2022, 02:43 PM #3

Used a SATA drive from my main system. Connected it with the NVMe removed. Also tried inserting the NVMe into the second M.2 slot. Still no improvement, video output remains absent and the boot debug light stays on.