F5F Stay Refreshed Hardware Desktop No display

No display

No display

K
kalleboii
Senior Member
738
04-29-2021, 11:31 AM
#1
Do you know the reason behind this behavior? I've unplugged and plugged everything back in, swapped the RAM modules. It still works without showing anything, even with the GPU and IGPU enabled. I sometimes see the debug indicator stuck at VGA, then it disappears.
K
kalleboii
04-29-2021, 11:31 AM #1

Do you know the reason behind this behavior? I've unplugged and plugged everything back in, swapped the RAM modules. It still works without showing anything, even with the GPU and IGPU enabled. I sometimes see the debug indicator stuck at VGA, then it disappears.

C
Caydoyo
Member
73
05-02-2021, 03:54 AM
#2
Sure! Let me know if you have an integrated GPU on your system. If you do, you can safely detach the GPU from the motherboard and then connect the display cable directly to the motherboard to see if it boots. Even without an integrated GPU, you can try removing the GPU and check if the PC starts up at all. This helps confirm that other parts are functioning properly.
C
Caydoyo
05-02-2021, 03:54 AM #2

Sure! Let me know if you have an integrated GPU on your system. If you do, you can safely detach the GPU from the motherboard and then connect the display cable directly to the motherboard to see if it boots. Even without an integrated GPU, you can try removing the GPU and check if the PC starts up at all. This helps confirm that other parts are functioning properly.

C
ChocChocGaming
Junior Member
24
05-18-2021, 03:38 PM
#3
Unplug your GPU from the PCIe slot and switch to a lower one. Did you choose the right input on your monitor? Everything appears normal, but the post LEDs show problems when they remain still. Notably, your RAM doesn’t light up—have you turned off the LED indicator?
C
ChocChocGaming
05-18-2021, 03:38 PM #3

Unplug your GPU from the PCIe slot and switch to a lower one. Did you choose the right input on your monitor? Everything appears normal, but the post LEDs show problems when they remain still. Notably, your RAM doesn’t light up—have you turned off the LED indicator?