F5F Stay Refreshed Software Operating Systems No conexión Ethernet en el sistema operativo.

No conexión Ethernet en el sistema operativo.

No conexión Ethernet en el sistema operativo.

K
Killa_Dx
Senior Member
Find
645
04-25-2023, 06:22 AM
#1
Hello, after installing Pop_OS everything appears functional, yet your Ethernet connection isn’t detected. When you tether your phone, internet access works but Pop doesn’t attempt a wired link. You’ve reset it several times, unplugged and reconnected the cable, but nothing seems to resolve the issue.
Reply
Reply
K
Killa_Dx
04-25-2023, 06:22 AM #1

Hello, after installing Pop_OS everything appears functional, yet your Ethernet connection isn’t detected. When you tether your phone, internet access works but Pop doesn’t attempt a wired link. You’ve reset it several times, unplugged and reconnected the cable, but nothing seems to resolve the issue.

Reply
Reply
H
HarryZoe
Member
Find
62
04-25-2023, 03:42 PM
#2
The command displays network interface details, including IP addresses and connectivity information.
Reply
Reply
H
HarryZoe
04-25-2023, 03:42 PM #2

The command displays network interface details, including IP addresses and connectivity information.

Reply
Reply
X
XGigaPL
Member
Find
172
04-25-2023, 08:26 PM
#3
1: signal detected loopback, mtu 65536, no queueing, state unknown. Default group, bandwidth 1000 Mbps, loopback address 127.0.0.1. Scope host, valid time indefinite.
2: device identified as usb0, broadcast/multicast enabled, mtu 1500, fq_codel filtering, ae address 0f:87:14:4f:4b. Connected to 192.168.185.242 with full scope and static routes.
Reply
Reply
X
XGigaPL
04-25-2023, 08:26 PM #3

1: signal detected loopback, mtu 65536, no queueing, state unknown. Default group, bandwidth 1000 Mbps, loopback address 127.0.0.1. Scope host, valid time indefinite.
2: device identified as usb0, broadcast/multicast enabled, mtu 1500, fq_codel filtering, ae address 0f:87:14:4f:4b. Connected to 192.168.185.242 with full scope and static routes.

Reply
Reply
U
Ultima_cj0628
Junior Member
Find
9
04-28-2023, 10:23 AM
#4
Hi, are sure that phone teather is working? Just test it with another OS. And what does it mean I do not have internet? You cannot "open" facebook.com? Pease run command "ping -c 3 1.1.1.1". If there is no ping or you are not sure please show us command "ip r" or "route -n". If you have ping but cannot open facebook.com it means you cannot resolve it.
Reply
Reply
U
Ultima_cj0628
04-28-2023, 10:23 AM #4

Hi, are sure that phone teather is working? Just test it with another OS. And what does it mean I do not have internet? You cannot "open" facebook.com? Pease run command "ping -c 3 1.1.1.1". If there is no ping or you are not sure please show us command "ip r" or "route -n". If you have ping but cannot open facebook.com it means you cannot resolve it.

Reply
Reply
N
natedog5476
Junior Member
Find
32
04-28-2023, 11:53 PM
#5
I worked it out. For using Ethernet with Pop_OS and a MSI Z390 board, you need to enter the BIOS and turn on the "Lan option ROM." After that, everything functioned immediately. It's rewarding when a simple assumption solves the issue. Below are the terminal commands for IP configuration without the USB teather: : lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 00:d8:61:1a:92:d5 brd ff:ff:ff:ff:ff:ff altname enp0s31f6 inet 192.168.1.241/24 brd 192.168.1.255 scope global dynamic noprefixroute eno1 valid_lft 86318sec preferred_lft 86318sec inet6 fe80::ffb2:a0f1:7aa6:f5d6/64 scope link noprefixroute valid_lft forever preferred_lft forever
Reply
Reply
N
natedog5476
04-28-2023, 11:53 PM #5

I worked it out. For using Ethernet with Pop_OS and a MSI Z390 board, you need to enter the BIOS and turn on the "Lan option ROM." After that, everything functioned immediately. It's rewarding when a simple assumption solves the issue. Below are the terminal commands for IP configuration without the USB teather: : lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 00:d8:61:1a:92:d5 brd ff:ff:ff:ff:ff:ff altname enp0s31f6 inet 192.168.1.241/24 brd 192.168.1.255 scope global dynamic noprefixroute eno1 valid_lft 86318sec preferred_lft 86318sec inet6 fe80::ffb2:a0f1:7aa6:f5d6/64 scope link noprefixroute valid_lft forever preferred_lft forever

Reply
Reply
L
live77
Member
Find
194
04-29-2023, 01:34 AM
#6
Great to hear it!
Reply
Reply
L
live77
04-29-2023, 01:34 AM #6

Great to hear it!

Reply
Reply