No arranjo com 4ª unidade de 4GB RAM DDR4 Trident instalada

F5F Stay Refreshed Hardware Desktop No arranjo com 4ª unidade de 4GB RAM DDR4 Trident instalada

MetySushi
Member

01-16-2019, 03:28 PM

I recently bought a 2060 super Fe and installed it in my son's rig, which is a Mobo - Asus z170-a CPU, an I5 6600k, 4x4gb Trident Z 3200hz GPU, a 2060 super FE PSU, EVGA 550 GS SSD X2 M.2 X1. When I added four 4gb DDR4 sticks, the PC wouldn't boot and it showed error codes. The LEDs would flash before it stopped working. After removing a stick, everything worked fine—PC started up and ran games without issues. Could the PSU be the cause of these problems?

MetySushi

01-16-2019, 03:28 PM #1

Tomitte
Junior Member

01-16-2019, 03:48 PM

It makes sense to perform memtests on every switch. Adding just one dimmer shouldn't lead to PSEU issues.

Tomitte

01-16-2019, 03:48 PM #2

It makes sense to perform memtests on every switch. Adding just one dimmer shouldn't lead to PSEU issues.

Gaffate1p
Junior Member

01-16-2019, 10:39 PM

You've completed tests on each stick, everything looks good. I tried all the sticks and unplugged one SSD—Windows booted in but crashed after about 30 seconds.

Gaffate1p

01-16-2019, 10:39 PM #3

You've completed tests on each stick, everything looks good. I tried all the sticks and unplugged one SSD—Windows booted in but crashed after about 30 seconds.

XKirito_SAO
Member

01-19-2019, 01:20 AM

All dimmers pass through several cycles smoothly. Then I’d check each slot one by one and also test them together. It might be a problem with the motherboard.

XKirito_SAO

01-19-2019, 01:20 AM #4

All dimmers pass through several cycles smoothly. Then I’d check each slot one by one and also test them together. It might be a problem with the motherboard.