F5F Stay Refreshed Hardware Desktop New PC boots with just two clicks after turning on.

New PC boots with just two clicks after turning on.

New PC boots with just two clicks after turning on.

Y
yoruyohan
Member
114
03-09-2019, 09:14 PM
#1
I've just put together a PC, I'm sure all the connectors and slots are properly seated. Most of these components have been used before. I'm not against the possibility something might be wrong. Mobo, PSU, GPU were given to me by friends, but the rest I've bought and used recently. CPU and RAM are brand new, and the storage is fresh. Parts list: R7 2700X / MSI 1660ti / Gigabyte X570 iAORUS PRO WIFI Mini ITX / G.Skill Ripjaws 2x8 3600 DDR4 / FSP Group Dagger Pro 650W 80+ Gold the power button LED is on when the PSU is active. When I press it, I only get two quick clicks from the PSU. No fans or anything. I have no idea except maybe the PSU is failing. Any suggestions would be greatly appreciated!
Y
yoruyohan
03-09-2019, 09:14 PM #1

I've just put together a PC, I'm sure all the connectors and slots are properly seated. Most of these components have been used before. I'm not against the possibility something might be wrong. Mobo, PSU, GPU were given to me by friends, but the rest I've bought and used recently. CPU and RAM are brand new, and the storage is fresh. Parts list: R7 2700X / MSI 1660ti / Gigabyte X570 iAORUS PRO WIFI Mini ITX / G.Skill Ripjaws 2x8 3600 DDR4 / FSP Group Dagger Pro 650W 80+ Gold the power button LED is on when the PSU is active. When I press it, I only get two quick clicks from the PSU. No fans or anything. I have no idea except maybe the PSU is failing. Any suggestions would be greatly appreciated!

G
gerald_fenwick
Junior Member
2
03-12-2019, 12:32 PM
#2
You can detach the cables from the motherboard, including the power and 24-pin connectors, then perform the paper clip test to check if the PSU is operational. Most units include a self-test feature where the fan increases speed and then stops. The fan inside the PSU may attempt to run but remain silent, indicating a fault that requires replacement.
G
gerald_fenwick
03-12-2019, 12:32 PM #2

You can detach the cables from the motherboard, including the power and 24-pin connectors, then perform the paper clip test to check if the PSU is operational. Most units include a self-test feature where the fan increases speed and then stops. The fan inside the PSU may attempt to run but remain silent, indicating a fault that requires replacement.

P
pepsitaroh
Member
209
03-12-2019, 01:28 PM
#3
CPU pins bent?
P
pepsitaroh
03-12-2019, 01:28 PM #3

CPU pins bent?

D
dillemo
Junior Member
9
03-13-2019, 12:13 AM
#4
They're all fine.
D
dillemo
03-13-2019, 12:13 AM #4

They're all fine.

T
TheBozoPlays
Senior Member
642
03-13-2019, 08:05 AM
#5
Attempted to operate the system using just the most critical components connected.
T
TheBozoPlays
03-13-2019, 08:05 AM #5

Attempted to operate the system using just the most critical components connected.