New motherboard installed, CPU and RAM added but system remains inactive.
New motherboard installed, CPU and RAM added but system remains inactive.
You're facing a tricky setup with mixed components and unclear specs. Let's break it down:
- Your old motherboard was a Z87 OC Formula board with DDR3 RAM, likely 8GB, and an Intel i4 processor.
- You've upgraded to a Z390 M Gaming board, DDR4 8GB, and an Intel i9.
- A Noctua NH-D9L cooler is installed.
- You have an NVidia 2070 GPU (possibly a Super) and a Gamemax AC power supply.
- Your PSU is a full-range model—hard to say what it does.
The main problem seems to be that the system won't turn on. Since you're unsure about the PSU's purpose, it might not be providing enough power or compatibility. Check the power delivery from your new board and GPU to ensure they're receiving sufficient voltage. Also, verify that all cables and connections are secure. If the issue persists, consider testing with a known-good PSU or consulting a technician. You don’t want to waste more time on this!
The picture appears acceptable. Pressing power seems to trigger something. The power switch on the back of the PSU is active. You should be sure the fpanel connectors beneath the GPU are functioning properly, though you can't confirm from this image.
Start by removing two RAM sticks (typically the first and third from the CPU, though check your motherboard manual). Attempt to boot the system.
Quick note from my dad: I realized the front panel connectors were swapped, but the PC is now fully functioning. Thanks for the assistance!