New computer without screen – Can't access BIOS settings
New computer without screen – Can't access BIOS settings
Thanks for your reply. Here’s what you attempted:
1. Eliminated the M.2 drive – no success
2. Used a different hard drive (non-M.2) – no success
3. Checked RAM, CPU, and M.2 SSD on another machine – confirmed functional
4. On my new PC, the code displays VGA and CPU is also fine.
I only check the LED screen on the motherboard. I assumed I missed the fact that the desktop reacts to CTRL ALT DELETE 20210411-002113-lodtbqOy.mp4.
Okay, okay. Just the the keyboard (disconnect all connected devices to it) Disconnect the HDD or any other storage We need only RAM, CPU, GPU, PSU and keyboard. Oh the one thing where u said mouse was getting light but not keyboard I guess it means ram needs to be reseated (best way to fix it imo, telling from my experience). Keep the motherboard/pc case horizontally if u haven't done it yet.(Yes even many times this helped .) Yes sometimes you just need mounting pressure. (I should have tried this more often, yeah still don't push too hard tho, don't use ur hand to push it, u can use stock cooler or something else.i would recommend stock cooler) Connect CPU fan only (leave the other fans out of this, well mine has only CPU fan) There would be small button cell remove it and put it back after minute or two. (-nv inside, +ve outside) Check if the power button and it's rainbow wires are connected correctly (if there's no start button on motherboard and u r using case Button to start) Another way to clear CMOS is Screwdriver tip method, in powered off state u connect the tips of jumper using screwdriver or it's tip for solid one minute at least! (You will need to find where ur jumper is located at on the motherboard.) ------------- Now then pc/motherboard is now placed horizontally. Shutdown, power down and unplug PSU/PC from wall. Then do below steps 00) reset the jumper as told above 0) this might sound weird but disconnect power cord from PSU too. 1) remove the button cell 2) take out the ram and gpu 3) other than keyboard disconnect everything. 4) disconnect all storage devices 4.1) is ur CPU socket clean? (Just saying) 5) get the CPU out then reseat it, (u can do very tiny push too. I would still recommend stock cooler) 6) after reseating put the ram back (Don't need to push it down too hard just until click sound, yeah pushing down too hard on ram also made my computer not work then reseated in same slot it worked and this is has happened many times) I would recommend going with only one stick of ram,use working stick of ram btw. 7) put the GPU back and the button cell (Rough surface in and smooth shiny surface out, that is negative in and positive out) 8) reconnect the power cable to PSU reconnect the hdmi/display cable to GPU and monitor except (Connect monitor's end to Gpu and GPU's end to monitor.) 9) connect the PSU cable to wall start and wait and see. If it works it works If it doesn't Use the other ram slots while keeping the GPU in same slot. After trying all ram slots, Change the GPU slot (I am presuming ur board has two PCIe slots). And then try all ram slots. Keep ur mind at peace and try and try carefully, don't be hasty at all. If it works that's good u will be greeted by bios and then shut it down connect storage device and mouse (but before that disconnect the plug from wall!!!). If this doesn't work I am out of solutions, sorry bruh. and be careful bcuz the PGA socket is..... i kinda don't like that they don't have any gripping system. - thank you.