F5F Stay Refreshed Hardware Desktop New build, new issues?

New build, new issues?

New build, new issues?

Pages (2): 1 2 Next
C
claspedmetal
Member
157
05-30-2017, 06:29 PM
#1
I moved from
Gigabyte H310M S2H with i3-8100 CPU
to an ASUS PRIME B760M-A D4, Corsair VENGEANCE LPX DDR4 16GB (2x8GB) 3200MHz CL16 Intel XMP 2.0 iCUE compatible computer memory - Black (CMK16GX4M2E3200C16), an Intel Core i7-12700KF Gaming Desktop Processor with up to 5.0 GHz, Unlocked LGA1700 600 Series Chipset and 125W power supply, along with a Western Digital 500GB WD Blue 3D NAND internal PC SSD - SATA III 6 Gb/s, M.2 2280 interface, supporting speeds up to 560 MB/s.
The old motherboard's working boot drive, a 4TB traditional HD and an NVME drive, wasn't detected in the M.2 slot covered by the heatsink, even after adding extra rubber or placing it in the uncovered slot. The computer failed to enter BIOS.

These problems often lead me to wish I had purchased a pre-built machine, but I just can't resist... Please help! Thank you.
C
claspedmetal
05-30-2017, 06:29 PM #1

I moved from
Gigabyte H310M S2H with i3-8100 CPU
to an ASUS PRIME B760M-A D4, Corsair VENGEANCE LPX DDR4 16GB (2x8GB) 3200MHz CL16 Intel XMP 2.0 iCUE compatible computer memory - Black (CMK16GX4M2E3200C16), an Intel Core i7-12700KF Gaming Desktop Processor with up to 5.0 GHz, Unlocked LGA1700 600 Series Chipset and 125W power supply, along with a Western Digital 500GB WD Blue 3D NAND internal PC SSD - SATA III 6 Gb/s, M.2 2280 interface, supporting speeds up to 560 MB/s.
The old motherboard's working boot drive, a 4TB traditional HD and an NVME drive, wasn't detected in the M.2 slot covered by the heatsink, even after adding extra rubber or placing it in the uncovered slot. The computer failed to enter BIOS.

These problems often lead me to wish I had purchased a pre-built machine, but I just can't resist... Please help! Thank you.

X
xSkylerr
Member
177
05-31-2017, 01:48 AM
#2
What processor is currently set up in the updated configuration?
X
xSkylerr
05-31-2017, 01:48 AM #2

What processor is currently set up in the updated configuration?

R
Roxas45
Junior Member
13
06-10-2017, 09:30 PM
#3
This Intel Core i7-12700KF gaming desktop processor has 12 cores with up to 5.0 GHz, supports 8 physical and 4 extra threads, uses the LGA1700 socket, features a 600 Series chipset, and delivers 125W of power.
R
Roxas45
06-10-2017, 09:30 PM #3

This Intel Core i7-12700KF gaming desktop processor has 12 cores with up to 5.0 GHz, supports 8 physical and 4 extra threads, uses the LGA1700 socket, features a 600 Series chipset, and delivers 125W of power.

T
Tyger698
Member
54
06-10-2017, 10:21 PM
#4
It seems to enter BIOS but fails to boot. The power supply appears to be working, yet the NVME isn't detected during startup.
T
Tyger698
06-10-2017, 10:21 PM #4

It seems to enter BIOS but fails to boot. The power supply appears to be working, yet the NVME isn't detected during startup.

J
JennyJ2
Junior Member
2
06-11-2017, 05:08 AM
#5
I am attempting to utilize a total of NVME SSDs.
J
JennyJ2
06-11-2017, 05:08 AM #5

I am attempting to utilize a total of NVME SSDs.

P
pwnguy02
Member
122
06-11-2017, 12:53 PM
#6
Almost ready to open another machine and run a test. But now everything seems stuck...
P
pwnguy02
06-11-2017, 12:53 PM #6

Almost ready to open another machine and run a test. But now everything seems stuck...

P
Pilli_mehu
Member
52
06-12-2017, 08:32 PM
#7
During your BIOS access, did the SSD appear as a recognized device? Additionally, are you currently relying solely on the built-in GPU?
P
Pilli_mehu
06-12-2017, 08:32 PM #7

During your BIOS access, did the SSD appear as a recognized device? Additionally, are you currently relying solely on the built-in GPU?

_
69
06-12-2017, 10:45 PM
#8
It didn't appear at all, just the hard drive and optical drive. I'm using a new 3060 that was functioning properly.
_
_Dark_Hunter__
06-12-2017, 10:45 PM #8

It didn't appear at all, just the hard drive and optical drive. I'm using a new 3060 that was functioning properly.

Z
zombieruler22
Junior Member
14
06-12-2017, 11:21 PM
#9
Transfer NVME to another machine and let it start after some time. I'm hoping for success.
Z
zombieruler22
06-12-2017, 11:21 PM #9

Transfer NVME to another machine and let it start after some time. I'm hoping for success.

B
bishopboys68
Posting Freak
899
06-12-2017, 11:52 PM
#10
The specifications for your power supply unit are as follows: please refer exclusively to the cables provided with the PSU, as they are not compatible across different models or brands.
B
bishopboys68
06-12-2017, 11:52 PM #10

The specifications for your power supply unit are as follows: please refer exclusively to the cables provided with the PSU, as they are not compatible across different models or brands.

Pages (2): 1 2 Next