New Build - - - Is there a constant system stutter?
New Build - - - Is there a constant system stutter?
To the best of my understanding, the initial RAM installation may involve two sticks. The key point is that the first stick should be physically placed in DIMM_A2, which is standard, or another designated slot. Make sure to verify the slot labels in both the User Guide schematic and on the motherboard. Additional guidelines regarding RAM installation and setup are often provided. Be sure to read carefully in the Motherboard's User Guide/Manual, as it may suggest online updates from the manufacturer. Also, follow the instructions for clearing CMOS and replacing the battery. Don't forget to check the front panel connections, which can sometimes be confusing or easily mixed up.
So far the problem hasn't come up again, everything remains at their default RAM settings. I even turned on X3D Turbo Mode in BIOS and it's working properly. Initially it looked like my RAM was in the QVL, but upon closer inspection I might have forgotten the timing details from my first check. The timing should be CL30-38-38-96; this seems to point to the real issue.
Reviewing the motherboard manual didn't reveal any missed instructions for other RAM installations. I'll re-examine all front connections and ensure a fully functional CMOS battery is used for replacement.
Alright the stuttering keeps happening on random restarts. Just have to keep restarting until it stops. I turned off X3D turbo just to be safe. Everything is set to defaults in BIOS, but I still need to keep doing this until I replace the CMOS battery. At this point, I’m thinking about swapping out the motherboard entirely and getting a completely different one.
I double-checked the QVL for the motherboard again, but I misread how gigabyte categorized their RAM and forgot mine was there. My RAM is actually listed in the QVL.
So honestly, I’m really not sure what’s causing the issue anymore—other than a faulty CMOS battery or possibly the motherboard itself.
I also reprogrammed my drives into the new build and installed fresh Windows during setup.
Did you set up or refresh your chipset drivers? Install "gigabyte control centre" and allow it to update. You may have overlooked this step. If you don't need the installation afterward, you can remove it.
A bit more testing was done. It appears the stuttering happens only after computer restarts. Fully shutting down and then rebooting works perfectly. It doesn’t matter what kind of restart it is—whether it’s a software/driver install or just a manual Windows restart, 100% of the time a restart causes constant stuttering.
Unless the chipsets didn’t update properly like my BIOS did originally, I’ll try again but I’m confident everything should be up to date. The Gigabyte control center attempted to install unnecessary bloatware on my system, and many people online advise against using GCC in general. So I’ve downloaded the essential drivers and chipsets from other sources instead.
Now that I think these issues only appear during restarts, when I have time I plan to go back to square one. I’ll experiment with EXPO, BIOS, and other settings I thought were the cause, but I won’t restart—just shut down and boot up from the power button.
when using gcc you have the ability to manage the installed software... it's already on my computer but it's turned off during startup. so it only launches when i click its shortcut. .. but if you don't need or use it then it's not worth installing. You can obtain the latest drivers directly from gigabyte... I believe the most recent chipset drivers are around "6.10.22.027".
I'll assume the final test is now complete. Everything functions properly. Even EXPO operates at 100% efficiency. The issue appears to stem from restarting the machine, which requires a full shutdown and reboot for resolution. I've disabled fast startup in Windows, adjusted power configurations for optimal performance, updated chipsets and drivers along with the BIOS, but nothing resolves the recurring restarts and stuttering until it's powered off. This is the first time I've encountered such a problem, yet I'm relieved it's under control.
what type of hard drive are you using? ssd or nvme? have you adjusted the settings to optimize or defragment it?
Still experiencing stuttering during random boots. It doesn't really matter what the situation is, I just have to restart repeatedly until it works. I've noticed the cursor can stutter slightly in BIOS sometimes, which means the BIOS settings might be the issue. I'm wondering if the GPU could be the problem now. It might be a good time to mention that the new builds case has a vertical GPU mounting riser, and I wanted to test it out. Could the riser be causing problems with the GPU communicating to the motherboard?