New Build, all parts connected, but no video, -how to troubleshoot?
New Build, all parts connected, but no video, -how to troubleshoot?
New build, all parts connected yet no video,...all fans and RGB appear working by default. What should I check? The issue involves the Antec Performance case, Ryzen 7900X3d, ASUS ROG Strix X670 E-e gaming MOBO with MSI Coreliquid D360, 64GB RAM Corsair Titanium Dominator, Gigabyte gaming OC 4090 GPU, and NVMe M2 storage. I attempted a reflash but received no response. The MOBO shows code 0.0, indicating it's unused. I have until tomorrow (9-22-24) to return the MOBO, but I'm unsure if that's the best approach. The main system seems fine, but my Samsung Odessey G8 4K OLED 240 Hz monitor isn't displaying anything. Please advise.
Thank you for the update.
PSU -- Corsair 1000e --New
RAM link--
https://www.amazon.com/dp/B0CHSGDFN4?ref...asin_title
I haven’t actually flashed the MOBO. I attempted using FLASHBACK, holding the button for 3 seconds as the manual suggested, and waited for it to start blinking (while I had a USB drive --FAT 32--with BIOS from 9-12-24, renamed according to the manual). But it never began blinking.
That’s when I started suspecting the MOBO might be faulty.
So I never actually flashed or reflashed the BIOS.
---I actually kept the DP connected from the I/O until this morning because I needed a power cable from Corsair for the 4090. -- I don’t have video of that either.
--> I removed and reinserted the two RAM sticks. I tried one in A2 and then the other in A2, but I haven’t tested any other slots except A2 with just one stick.
It almost looks like whatever software or firmware is supposed to be on the MOBO has been completely wiped, making it impossible to accept a new version or any update. But would the fans, pump, and RGB work as expected?
I don't believe I've ever modified this thread. The approach I took was to send back the MOBO and swap it with the identical model from Amazon. After inserting the new MOBO and reassembling everything, it's worked perfectly. I maintained the same build configuration exactly as before. By December 27, 2024, it has exceeded my expectations.