Need some assistance with your project? I'm here to help.

F5F Stay Refreshed Hardware Desktop Need some assistance with your project? I'm here to help.

Darkbandit92
Posting Freak

839

07-01-2023, 05:02 AM

We made some errors while assembling the PC. Initially, we placed the RAM in slots 3 and 4, which wasn't correct. I moved the 3 to slot 2, but it didn<|pad|>'s place wasn't recognized. Later, I noticed the graphics card was positioned too low in the case, risking damage to nearby wires. After adjusting, the PC reported no signal. The images below display the current setup and the wires beneath the GPU. Will the GPU fit in the designated area? My friend mentioned it should be there.

Darkbandit92

07-01-2023, 05:02 AM #1

Haz3lNut
Member

07-03-2023, 10:16 PM

The wires are okay. They won't melt. Verify all connections are tight. The graphics card should be placed in the top slot, as usual.

Haz3lNut

07-03-2023, 10:16 PM #2

The wires are okay. They won't melt. Verify all connections are tight. The graphics card should be placed in the top slot, as usual.

BenTGreat
Senior Member

437

07-10-2023, 08:57 AM

Let's see what the forecast says.

BenTGreat

07-10-2023, 08:57 AM #3

Let's see what the forecast says.

SkyQUEEN4756
Member

07-10-2023, 10:41 AM

I don't believe it, but try it and check if it works

SkyQUEEN4756

07-10-2023, 10:41 AM #4

I don't believe it, but try it and check if it works

kaire2015
Member

232

07-10-2023, 08:20 PM

It seems you're considering alternatives if the current setup doesn't work. You might need a smaller fan, a better motherboard, or an improved case layout.

kaire2015

07-10-2023, 08:20 PM #5

It seems you're considering alternatives if the current setup doesn't work. You might need a smaller fan, a better motherboard, or an improved case layout.

Flashplayer551
Member

195

07-11-2023, 03:08 AM

The connections shouldn't easily melt. I used wires on the backplate in my earlier project with an R9 380, and everything worked fine.

Flashplayer551

07-11-2023, 03:08 AM #6

The connections shouldn't easily melt. I used wires on the backplate in my earlier project with an R9 380, and everything worked fine.