Need guidance on using a router as an access point?
Need guidance on using a router as an access point?
Hi, I just purchased an Asus router (RT-AC86U) to improve my weak signal. I’m planning to use it as an access point and read some advice suggesting placing the Ethernet cable in a LAN port instead of the WAN port. The person recommended disabling DHCP on your router and connecting it via LAN ports to mimic a direct ISP connection. They explained that this makes devices appear as if they’re directly linked to the ISP, which should work for your setup. I’m still seeking more opinions before proceeding, so I want to confirm whether to put the cable in the LAN or WAN port based on their guidance.
It's not just about having a second router; even with a main connection, each device has its own settings linked to the primary router. You need to turn off your main router's Wi-Fi so it doesn't conflict, then connect the new ISP router to your existing one and set it up properly. To turn off Wi-Fi, you must access the router gateway and disable Wi-Fi while keeping the LAN active.
Your issue likely improves with your own router since the problem isn't about DHCP servers or settings, but rather your signal range.
Yes, it's a good idea to disable DHCP since the person you met online recommended it.
You definitely want this to avoid placing another router between them.
It seems the connection issue might be related to a temporary problem with the router or the website. Check your internet connection and try again later. If the problem persists, contact ASUS support for further assistance.
Since it selects an IP from another router through DHCP, you must identify which one is listed on the router’s interface or check with an IP scanner such as Fing on your mobile device.