Need assistance with your motherboard? Let me know what you're experiencing so I can help.
Need assistance with your motherboard? Let me know what you're experiencing so I can help.
The setup begins with the biostar X370gt5 board, which served my friend reliably for more than a year. He noticed his DDR4 was running at 1066MHz on a Ryzen processor. When searching for an XMP profile, it wasn't visible in the BIOS. After updating the BIOS to the latest version, he located the correct setting. The RAM package was rated by G.Skill at 2133MHz. He increased the speed to 2400MHz at 1.35V, benefiting from effective cooling. The system handled demanding CPU and GPU workloads smoothly for tasks like modern warfare simulations and stress tests. After a few days, he powered it back on, but nothing appeared. The fans spun, RGB lights flashed, and the motherboard displayed colors, yet no data showed up. He attempted troubleshooting: swapped RAM sticks, placed the GPU in the lower slot, rechecked power connectors, cleared CMOS, but issues persisted. Recently, he received a Tomahawk B450 Max motherboard and wanted to test it. The socket appeared slightly dirty, though no faults were found beyond minor dust accumulation. He hadn't removed the CPU or cooler since purchase, suggesting the problem stemmed from storage time. He also needed thermal paste, which had run out. What high-performance yet affordable thermal paste should I consider (around $5)? Could dual-bios support resolve this? The CPU he needs is a Ryzen 7 2700X. I'm unsure if the second BIOS version supports it or if the main update fixed compatibility. When removing his AIO, the CPU came loose. No obvious defects were found except for the retention clip, which felt slightly loose after being in place for weeks. I suspect bending of a few pins might have occurred, but resetting them resolved the issue for his Tomahawk. Is the socket itself the problem here?
The situation might have started before his actions. Please keep the paste flexible going forward; avoid pulling it too hard.
> I personally use Arctic MX-4. Good long lasting stuff, decent performance Did your friends system work normally with a new motherboard? It could really be any number of things. Maybe, but likely you'll need a 1st generation chip. There is certainly no guarantee's here. No, This can happen with ZIF sockets. Try to twist the cooler to release the thermal paste before pulling straight up. Usually this doesn't cause any damage, but it's not unheard of.
Do you have a reference for that thermal paste (not from Amazon)? All my components fit on his new motherboard. I don’t own a first-gen chip—how do I get one from AMD? You can do it during this COVID-19 situation. Thanks for the tips on coolers.
Arctic MX-4 details: https://www.ebay.ca/itm/312716429310 Have you experimented with the 2700X? Consider trying it out first. Look for a first-gen Zen chip in used condition (Local Classifieds, usual online platforms). There are options to handle local classifieds without direct contact, and several postal services provide COD (Collect-On-Delivery) services. R3 1200 models are widely available at reasonable prices. Bulldozer APU units should also be functional.