Need assistance with DDR3 speed and timing? Let me know what you're experiencing!
Need assistance with DDR3 speed and timing? Let me know what you're experiencing!
Hello, your Corsair Vengeance PRO is working well with the 2400 MHz speed. The timing differences you noticed are likely due to BIOS settings versus the manufacturer's recommended values. You're correct that XMP support is enabled and boosting to 2400 MHz can improve performance. However, it’s a good idea to align your BIOS clock with the website timing (9-9-9-24) for optimal stability. The voltage of 1.65V is standard for this model, so you’re all set unless you notice any instability. If everything feels fine, you can stick with the automatic settings. Thank you!
SPD base frequency is set at 9-9-9 XMP. Timings are 11-13-13 for 2400MHz, which works well. Tested at 2200MHz using Mushkin Redlines, showing solid performance. Voltage range around 1.65V to 1.70V, matching the rated 2133MHz.
Sure, please review the material and let me know your thoughts. I'll provide guidance based on what you share.