Need assistance? MOBO is here to help!
Need assistance? MOBO is here to help!
NekoKagamine
12-20-2025, 07:33 PM #11When using a chip, ensure the BIOS version you have matches what the old system supported or what you attempted to install. If not, it might be partially damaged. I refer to it as "Semi-Borked" since it could be salvaged but not through standard BIOS flashing. The only reliable solution is using a programmer, which is affordable. Always verify the chip type on your board beforehand. A suitable programmer example includes models like CH341A with SOIC8 SOP8 Test Clip EEPROM Flash BIOS USB Programmer for Arduino Fast Ship on eBay. Make sure you understand the chip type and software beforehand. A programmer bypasses the usual BIOS flash restrictions, allowing you to update with any version you wish. However, traditional flashing remains risky and should only be done when necessary. Even with a programmer, caution is advised—risks still exist. If the system functions properly, leave it as is.
HaloDXXIII
12-20-2025, 10:55 PM #12flashing the bios the traditional way is not really that risky nowadays, I am flashing mobo bioses regular... and I also have a ch43a which I got for gpus though the error here is the poster flashed an older bios onto his board that does not support his processor, no issue with the bios, issue with the user. So I was hesitant to even suggest a programmer
LennoxMacduff
12-21-2025, 09:24 PM #13Check if Gigabyte offers assistance for your issue. Reach out to their support team directly for help.
Ubermonkeyfish
12-24-2025, 02:06 AM #15I get that but anytime you flash a BIOS there is always the risk of it failing for some reason, even if it all seems to go well. Thing is it's not working "As Is" so I had to approach it from that perspective. However from the looks of it, I do agree an older CPU really is the best shot at getting it working again short of using a programmer and if using an older chip fails, that's probrably what it will take to fix it. TBH shorting a chip when it's powered on.... Risky to say the least of it... I'd think doing that would kill the chip, board or maybe both so I must say don't do that , instead just find an older CPU the BIOS version you tried to flash in will support and give that a try.