Need assistance boosting RAM speed during gaming on PC 7

Pages (2): 1 2 Next

BjornIronMan
Junior Member

11-10-2020, 09:20 AM

Respected All,
The name is Harris and I’m new too. I hope everyone is doing well despite the tough times from the pandemic. Actually, I recently purchased a motherboard and four Trident AZ 4266MHz RAM sticks using money I earned over two years ago. However, after checking the BIOS, it’s running at 2133Mhz instead of what I expected. I tried increasing the frequency to 4266MHz and setting the DDRAM voltage to 1.500V in the BIOS, but it still shows an error. I need to revert back to the default settings so it can run properly on Windows. Please help me fix this according to its specifications.
Thank you and take care.

BjornIronMan

11-10-2020, 09:20 AM #1

Dracode
Member

150

11-10-2020, 03:52 PM

Check the XMP profile to find out what options are available alongside the 4266.

Dracode

11-10-2020, 03:52 PM #2

Check the XMP profile to find out what options are available alongside the 4266.

Guapa57
Junior Member

11-10-2020, 04:26 PM

I faced the same problem with my RAM. You must revisit your BIOS settings and find an option labeled XMP. Turn it on, and then reset the overclock settings to the default level.

Guapa57

11-10-2020, 04:26 PM #3

I faced the same problem with my RAM. You must revisit your BIOS settings and find an option labeled XMP. Turn it on, and then reset the overclock settings to the default level.

creapper666
Junior Member

11-10-2020, 06:23 PM

Absolutely, thank you. The frequency is approximately 3322Mhz.

creapper666

11-10-2020, 06:23 PM #4

Absolutely, thank you. The frequency is approximately 3322Mhz.

Creeperman3
Senior Member

454

11-11-2020, 12:34 PM

Thank you for the update. However, XMP displays approximately 3322 as I discussed with rgd1101.

Creeperman3

11-11-2020, 12:34 PM #5

Thank you for the update. However, XMP displays approximately 3322 as I discussed with rgd1101.

bennythesnug
Junior Member

11-12-2020, 02:44 PM

since the motherboard only supports up to 4133 with xmp profile. any higher requires oc, which isn't reliable.

bennythesnug

11-12-2020, 02:44 PM #6

since the motherboard only supports up to 4133 with xmp profile. any higher requires oc, which isn't reliable.

minigames4lyfe
Junior Member

11-18-2020, 03:22 AM

The motherboard advertises compatibility up to 4133mhz, but only six RAM configurations are listed for this model. Among them, just one supports four dimensions, while the remaining three only accommodate two dimensions.

minigames4lyfe

11-18-2020, 03:22 AM #7

MrT1mkaLP
Junior Member

11-25-2020, 09:57 PM

But I also updated the firmware, which it claims will improve XMP. You can check the firmware list for more details.

MrT1mkaLP

11-25-2020, 09:57 PM #8

But I also updated the firmware, which it claims will improve XMP. You can check the firmware list for more details.

ketman34
Posting Freak

834

11-25-2020, 11:53 PM

https://www.techpowerup.com/222553/g-ski...2x-8gb-kit
this? why are you doing 1.5v?
full system spec? include make and model of the psu

ketman34

11-25-2020, 11:53 PM #9

https://www.techpowerup.com/222553/g-ski...2x-8gb-kit
this? why are you doing 1.5v?
full system spec? include make and model of the psu

Itz_Ozzy94
Junior Member

11-26-2020, 01:21 AM

#10

Since I'm a gamer aiming for optimal performance, here are my specifications:
Intel 8600k
32GB RAM (4266MHZ)
Gigabyte 2070 Super
10TB HDD
500GB SSD
Evga 1600 G2 PSU

Itz_Ozzy94

11-26-2020, 01:21 AM #10

Since I'm a gamer aiming for optimal performance, here are my specifications:
Intel 8600k
32GB RAM (4266MHZ)
Gigabyte 2070 Super
10TB HDD
500GB SSD
Evga 1600 G2 PSU

Pages (2): 1 2 Next