NAS not responding to signals, here are some ideas:
NAS not responding to signals, here are some ideas:
NAS configuration: Xeon E5-2666 V3 processor, Huananzhi X99-8M Gaming, 32GB ECC RAM (2x16GB), EVGA GTX 960 graphics card, Coolermaster V650S power supply.
GPU issue: No signal detected – possible GPU failure or faulty x16 motherboard slot.
Do you have additional graphics cards available for testing? Is the GPU receiving sufficient power?
The PSU has supported a GTX 970 before, but I’m unsure if installing it on this system caused any issues. The 960 board could have been damaged during installation. You might want to try testing it on another PC. If it functions there, the problem likely lies with the board itself. In that case, you’d need to replace it with a compatible GPU or explore alternatives.
Test the 960 on another machine. The issue is unclear—whether it's the CPU, GPU, motherboard, or RAM. This is why I rely on affordable, older components that have proven to work. (An old GeForce 9400, the cheapest option for a specific socket, limited DIMMs...) This increases your chances of finding a mix of parts that will start functioning. Are you seeing any error messages from the motherboard? What type of RAM are you using?
Samsung ECC RAM arrived alongside the CPU and motherboard. (no signal detected)