F5F Stay Refreshed Software PC Gaming My computer’s pointing device and keypad suddenly cease functioning immediately following Windows startup.

My computer’s pointing device and keypad suddenly cease functioning immediately following Windows startup.

My computer’s pointing device and keypad suddenly cease functioning immediately following Windows startup.

Pages (2): Previous 1 2
_
_Ruisu
Junior Member
5
08-29-2016, 04:55 PM
#11
It’s not possible to do this. The connections to the motherboard via USB are problematic due to their small size, and you likely haven’t been the only one to encounter this issue – I have built many PCs and occasionally make mistakes at this point. Please review the board and its documentation carefully.
_
_Ruisu
08-29-2016, 04:55 PM #11

It’s not possible to do this. The connections to the motherboard via USB are problematic due to their small size, and you likely haven’t been the only one to encounter this issue – I have built many PCs and occasionally make mistakes at this point. Please review the board and its documentation carefully.

C
Casondra
Junior Member
18
08-30-2016, 01:45 AM
#12
Is it true that you connected your computer’s graphics card with a peripheral device? Are you attempting to deceive us? I cannot personally observe the situation, so I must depend on your explanation. It seems highly improbable that you inserted your keyboard and mouse directly into your graphics processing unit.
C
Casondra
08-30-2016, 01:45 AM #12

Is it true that you connected your computer’s graphics card with a peripheral device? Are you attempting to deceive us? I cannot personally observe the situation, so I must depend on your explanation. It seems highly improbable that you inserted your keyboard and mouse directly into your graphics processing unit.

S
superjr123
Member
62
08-30-2016, 10:11 AM
#13
After assembling your computer, you’re likely wondering about the optimal Windows version. You’ve recently rebuilt your PC. Did you change the motherboard? Did you reinstall Windows? Generally, a Windows reinstallation is recommended after a motherboard change. In your situation, you probably need to install USB drivers. Install chipset drivers first. You’ll require a PS/2 keyboard and mouse until the USB drivers are installed.
S
superjr123
08-30-2016, 10:11 AM #13

After assembling your computer, you’re likely wondering about the optimal Windows version. You’ve recently rebuilt your PC. Did you change the motherboard? Did you reinstall Windows? Generally, a Windows reinstallation is recommended after a motherboard change. In your situation, you probably need to install USB drivers. Install chipset drivers first. You’ll require a PS/2 keyboard and mouse until the USB drivers are installed.

C
Chester007
Senior Member
528
08-31-2016, 01:12 AM
#14
The issue is a driver conflict. The system’s BIOS includes a built-in function, but it disables itself when control transfers to the operating system.

Connect the devices to the uppermost USB ports on your computer's rear panel.

If that doesn’t resolve the problem, attempt to enable USB legacy support within the BIOS settings – this may be labeled as USB 2.0, USB 1.1, or USB 1.0.

Alternatively, you may need a standard keyboard and mouse to access Windows and load your motherboard's chipset drivers (first), followed by the GPU, USB, LAN, and audio drivers. Then, proceed with installing additional drivers as needed – perhaps for the keyboard and mouse.

You can typically find most of your drivers on your motherboard manufacturer’s website, within the Support section. For graphics card drivers, visit AMD or Nvidia's websites.

If you provide us with your exact motherboard model, we can link you directly to the driver download page if you encounter difficulties locating it.
C
Chester007
08-31-2016, 01:12 AM #14

The issue is a driver conflict. The system’s BIOS includes a built-in function, but it disables itself when control transfers to the operating system.

Connect the devices to the uppermost USB ports on your computer's rear panel.

If that doesn’t resolve the problem, attempt to enable USB legacy support within the BIOS settings – this may be labeled as USB 2.0, USB 1.1, or USB 1.0.

Alternatively, you may need a standard keyboard and mouse to access Windows and load your motherboard's chipset drivers (first), followed by the GPU, USB, LAN, and audio drivers. Then, proceed with installing additional drivers as needed – perhaps for the keyboard and mouse.

You can typically find most of your drivers on your motherboard manufacturer’s website, within the Support section. For graphics card drivers, visit AMD or Nvidia's websites.

If you provide us with your exact motherboard model, we can link you directly to the driver download page if you encounter difficulties locating it.

M
MooMoo2011
Senior Member
690
09-01-2016, 02:18 PM
#15
I mean my motherboard 😂😂🤦🏻‍♂️
M
MooMoo2011
09-01-2016, 02:18 PM #15

I mean my motherboard 😂😂🤦🏻‍♂️

M
mcDavoz
Senior Member
544
09-01-2016, 03:26 PM
#16
I will attempt to revise your statement in a different manner while maintaining its precise original meaning, tone, and intent.
M
mcDavoz
09-01-2016, 03:26 PM #16

I will attempt to revise your statement in a different manner while maintaining its precise original meaning, tone, and intent.

Pages (2): Previous 1 2