Multiple BSOD alerts following a new system setup
Multiple BSOD alerts following a new system setup
My machine operated smoothly before the Windows 10 upgrade. I overlooked that my motherboard supports EZdebug. After moving it across cities, before the install, it either restarted or displayed a CPU error. Turning it off and restarting fixed the problem. I plan to install the operating system but face crashes when entering the initial screen. It freezes quickly, making it hard to read the error message. Once the first BSOD appears, the system restarts normally after about two minutes, but then it keeps triggering errors. The logs mention issues like "System Service Exception," "IRQL NOT LESS OR EQUAL," or "Driver IRQL Not Less Or Equal." From what I learned, these are driver-related problems. I've tried replacing all components except the CPU and motherboard. I'm unsure how to proceed. Any advice would be greatly appreciated. Hardware: AMD R5 3600, 16 GB RAM, 2666 MB SSD, Intel Xeon E5-2600 v4 processor.
Once enabled, verify the voltage and speed settings of the RAM.
1.4v 2666 Ram is a Hyper X Alloy model, likely black in color.
Consider reducing the voltage to 1.35V and observe if it resolves the stability problems. Adjusting the speed is also possible if the RAM requires a higher frequency, but initially test lowering the voltage to the standard setting.
It stopped abruptly without showing the error message. The XMP feature failed.