MSI X570 Unify QVL delivers top-tier performance for memory needs.
MSI X570 Unify QVL delivers top-tier performance for memory needs.
Hey there, just a few quick points... I've got some B-Die in my 5950X running at 3800 16-16-16-36 1.47v instead of the standard 3200 14-14-14-34 1.35v for these sticks. The Thaiphoon Burner report is available on my site if you're interested in the specifics. It's running hotter than I'd like to see all the time—even with a decent fan and a 50-100% curve. They idle at 30c and jump into the 40s when under stress, but I chose to accept it and let things run their course until my next upgrade.
Now, a problem has arisen and it seems I'm planning to build a new system. Since I need to replace some memory, I checked the QVL list (using a site first, then verifying on MSI's official page). The options surprised me for a few reasons: 1) Most high-end kits (4000+ and below CL18) are either single 8GB sticks not approved for four sticks. 2) The affordable ones are incredibly pricey—like why such a kit would carry "Dominator" on it? It's a CL19 model! 3) Many of the 8GB sticks I currently use were only tested with two sticks on the board.
My goals are clear:
- Capacity: 32GB+
- Performance: At least a 4000 kit, since I'll be gaming and need solid gains at 1:1 FCLK/UCLK.
- Latency: Lower is better; my old 3200 CL14 sticks gave me good results back then, so I want minimal latency without a huge price jump.
- Ranks: A quad-rank setup would help, preferably with 16GB+ DIMMs for future expansion up to 64GB+.
- RGB: Not important—got the Vengeance RGB originally because that was the only choice.
- Special notes:
- The Infinity Fabric maxes around 1900 before errors appear; it still works up to 2000, but WHEA warnings were a concern for my RAID setups. I'm hoping for an AGESA update to boost that.
- I've already explored two options:
1. G.Skill PC4000 CL15 1.5v – 4 x 8GB – $449.99
*Pros:* Factory XMP at 1.5v, full capacity, immediate performance.
2. G.Skill PC4000 CL17 1.4v – 2 x 16GB – $309.99
*Pros:* More flexibility, extra slots for future growth, room to tweak timings.
- I'm also considering whether higher stock speeds (like 5333) or different configurations might be better than what I have.
What I've tried so far:
- Narrowed down to two models and evaluated their pros and cons.
- Think about compatibility, future upgrades, and how they align with my needs.
What should I keep in mind? Stick with the one I bought? Look for a 3800 CL14 kit? Let me know your thoughts!
No one has shared their experience yet. Have you checked if it works with a 5000-series processor and over 5000 MB RAM?