F5F Stay Refreshed Hardware Desktop Motherboard supports RGB lighting and USB connectors.

Motherboard supports RGB lighting and USB connectors.

Motherboard supports RGB lighting and USB connectors.

C
cutieputootie
Junior Member
2
01-22-2018, 05:36 PM
#1
Hi, your B450 Tomahawk lacks A/RGB headers and only has two USB ports. My setup is fine since fans can connect via the built-in controller. For the Wraith Prism cooler, you’ll likely need a different USB header—check its requirements. The case doesn’t have any for it. An NZXT internal hub might help add more ports if needed.
C
cutieputootie
01-22-2018, 05:36 PM #1

Hi, your B450 Tomahawk lacks A/RGB headers and only has two USB ports. My setup is fine since fans can connect via the built-in controller. For the Wraith Prism cooler, you’ll likely need a different USB header—check its requirements. The case doesn’t have any for it. An NZXT internal hub might help add more ports if needed.

H
hundulven
Junior Member
1
02-06-2018, 01:34 AM
#2
The MSI B450 Tomahawk features two 4-pin 12V RGB headers and the Wraith prism cooler uses a 4-pin connector for LED control. Instead of using a USB header, why not utilize one of these? Additionally, the B450 Tomahawk provides multiple fan connectivity options including a CPU fan, water pump fan, and four system fan connectors. All your cooling fan needs are covered.
H
hundulven
02-06-2018, 01:34 AM #2

The MSI B450 Tomahawk features two 4-pin 12V RGB headers and the Wraith prism cooler uses a 4-pin connector for LED control. Instead of using a USB header, why not utilize one of these? Additionally, the B450 Tomahawk provides multiple fan connectivity options including a CPU fan, water pump fan, and four system fan connectors. All your cooling fan needs are covered.

J
JavaCatX
Member
99
02-08-2018, 12:50 AM
#3
To fully manage all lighting zones on the Wraith Prism cooler, you must connect via USB so the software functions properly. An internal USB hub can provide additional headers if needed.
J
JavaCatX
02-08-2018, 12:50 AM #3

To fully manage all lighting zones on the Wraith Prism cooler, you must connect via USB so the software functions properly. An internal USB hub can provide additional headers if needed.