F5F Stay Refreshed Hardware Desktop motherboard features bright red LEDs on DRAM and CPU sections

motherboard features bright red LEDs on DRAM and CPU sections

motherboard features bright red LEDs on DRAM and CPU sections

J
jorgenwilhelm
Junior Member
15
09-08-2022, 12:58 AM
#1
I just finished assembling this build and everything functioned smoothly, all parts working without issues. Then I accessed the BIOS and noticed the RAM was running at 2133MHz (rated at 3200MHz), so I enabled XMP to adjust it to its maximum speed. After that, the computer began blue screen errors (I wasn’t performing heavy tasks, just a few tabs or RGB tools running), so I disabled XMP to check if it would help. Now the PC won’t boot or show any messages and only displays solid red on the CPU and DRAM LEDs. The fans are spinning and the RAM is active (RGB is working). Any suggestions or assistance would be greatly appreciated.
Specs: Ryzen 5 3600 Corsair Vengeance RGB Pro 3200MHz 16GB (2x8) ASRock X570 Pro4 Gigabyte 5700X Gaming OC Corsair CX650M 80 Plus Bronze
J
jorgenwilhelm
09-08-2022, 12:58 AM #1

I just finished assembling this build and everything functioned smoothly, all parts working without issues. Then I accessed the BIOS and noticed the RAM was running at 2133MHz (rated at 3200MHz), so I enabled XMP to adjust it to its maximum speed. After that, the computer began blue screen errors (I wasn’t performing heavy tasks, just a few tabs or RGB tools running), so I disabled XMP to check if it would help. Now the PC won’t boot or show any messages and only displays solid red on the CPU and DRAM LEDs. The fans are spinning and the RAM is active (RGB is working). Any suggestions or assistance would be greatly appreciated.
Specs: Ryzen 5 3600 Corsair Vengeance RGB Pro 3200MHz 16GB (2x8) ASRock X570 Pro4 Gigabyte 5700X Gaming OC Corsair CX650M 80 Plus Bronze

S
Splax67
Member
190
09-11-2022, 05:28 PM
#2
Use the reset pins on the motherboard to restart the BIOS. Refer to your manual for specific steps. Once the system boots, enable XMP to configure RAM speeds accurately.
S
Splax67
09-11-2022, 05:28 PM #2

Use the reset pins on the motherboard to restart the BIOS. Refer to your manual for specific steps. Once the system boots, enable XMP to configure RAM speeds accurately.