Modern PC built with integrated GPU, no extra GPU needed after setup

F5F Stay Refreshed Hardware Desktop Modern PC built with integrated GPU, no extra GPU needed after setup

Pages (3): Previous 1 2 3

12-20-2023, 07:25 PM

#21

I used the instructions for the front three fans, connected the cable to the motherboard to install Gen 2, as the connector has three pins. For the CPU, I removed the fan and watched a video.

GeneralSami

12-20-2023, 07:25 PM #21

I used the instructions for the front three fans, connected the cable to the motherboard to install Gen 2, as the connector has three pins. For the CPU, I removed the fan and watched a video.

xImRoyaL_PvP
Junior Member

12-21-2023, 01:46 AM

#22

Missed adding the picture too; I also saw a video about the fans.

xImRoyaL_PvP

12-21-2023, 01:46 AM #22

Missed adding the picture too; I also saw a video about the fans.

Maximoreyrojo
Member

141

12-23-2023, 08:36 AM

#23

For the CPU, ensure the screws are fully secured by tightening them completely until they no longer move. As the video indicates, start with the four screws, then focus on the opposite corners before moving to the remaining ones.

Maximoreyrojo

12-23-2023, 08:36 AM #23

Texas1047
Posting Freak

889

12-26-2023, 03:48 AM

#24

You linked all six cables correctly. The RGB cables go into the hub connected to the USB port. The fan cables use the 3-way splitter and are plugged into the fan headers on the motherboard, as illustrated in the final photo.

Texas1047

12-26-2023, 03:48 AM #24

The_D3mon
Senior Member

694

12-26-2023, 07:45 AM

#25

I watched the tutorial at the provided link. I also intended to use the hub, but discovered the hub connector required the existing USB ports on the motherboard. Could you share a video that might resolve this issue?

The_D3mon

12-26-2023, 07:45 AM #25

Pages (3): Previous 1 2 3