F5F Stay Refreshed Hardware Desktop Mobo status: dead or salvageable?

Mobo status: dead or salvageable?

Mobo status: dead or salvageable?

N
noaskills_69
Member
60
12-07-2016, 11:54 AM
#1
Hey everyone, I’ve got an old Intel i7 4790K with 16GB DDR3 RAM and an Asus Maximus VII Impact Z97. It’s been acting weird lately—after turning on, it keeps restarting every few seconds. You’d hear the power supply click, fans spin briefly, then stop, repeat. I’m curious if my ASUS motherboard is fine or if someone else has fixed this before. No codes or lights to show up for the CPU or RAM issues. Got any thoughts? Cheers, C
N
noaskills_69
12-07-2016, 11:54 AM #1

Hey everyone, I’ve got an old Intel i7 4790K with 16GB DDR3 RAM and an Asus Maximus VII Impact Z97. It’s been acting weird lately—after turning on, it keeps restarting every few seconds. You’d hear the power supply click, fans spin briefly, then stop, repeat. I’m curious if my ASUS motherboard is fine or if someone else has fixed this before. No codes or lights to show up for the CPU or RAM issues. Got any thoughts? Cheers, C

J
jaythered
Member
71
12-11-2016, 07:04 AM
#2
It seems the power supply unit is more likely to be the issue than the motherboard itself. I recommend testing another PSU using all your original components, including the motherboard. That would be the first step I'd take, since a failing PSU usually affects the board. If that doesn't resolve the problem, consider upgrading to a newer platform like an AM4-based system or a modern Intel build—old 4th Gen hardware isn't worth the investment anymore.
J
jaythered
12-11-2016, 07:04 AM #2

It seems the power supply unit is more likely to be the issue than the motherboard itself. I recommend testing another PSU using all your original components, including the motherboard. That would be the first step I'd take, since a failing PSU usually affects the board. If that doesn't resolve the problem, consider upgrading to a newer platform like an AM4-based system or a modern Intel build—old 4th Gen hardware isn't worth the investment anymore.

K
Koollojoe
Posting Freak
830
12-14-2016, 05:51 AM
#3
Thanks for the feedback. This was my initial try. All three PSUs checked out and continue to function without issue.
K
Koollojoe
12-14-2016, 05:51 AM #3

Thanks for the feedback. This was my initial try. All three PSUs checked out and continue to function without issue.

M
mj18wals
Senior Member
256
12-14-2016, 10:30 AM
#4
indefinitely sorry, its Christmas and too much wine!
M
mj18wals
12-14-2016, 10:30 AM #4

indefinitely sorry, its Christmas and too much wine!

S
SirJeffrey9
Junior Member
13
12-16-2016, 06:23 AM
#5
Did you own an aftermarket cooler before? Have you used it without a CPU cooler already?
S
SirJeffrey9
12-16-2016, 06:23 AM #5

Did you own an aftermarket cooler before? Have you used it without a CPU cooler already?

J
JonaxWTF
Member
221
12-16-2016, 06:31 AM
#6
I even thought about starting without a cooler, but it didn’t really matter. The system never reaches the POST phase.
J
JonaxWTF
12-16-2016, 06:31 AM #6

I even thought about starting without a cooler, but it didn’t really matter. The system never reaches the POST phase.

D
DRV111
Member
147
12-16-2016, 08:10 AM
#7
All socket pins appear fine with no visible issues. I’m fine with it being prepared for the bin, but I’ll push hard for PC compatibility if needed.
D
DRV111
12-16-2016, 08:10 AM #7

All socket pins appear fine with no visible issues. I’m fine with it being prepared for the bin, but I’ll push hard for PC compatibility if needed.

M
mentality_man
Member
123
01-05-2017, 09:23 AM
#8
Did you perform a visual check? Remove all heatsinks and look for any signs of scorching. High mounting pressure may cause problems like this, which is why I suggested it.
M
mentality_man
01-05-2017, 09:23 AM #8

Did you perform a visual check? Remove all heatsinks and look for any signs of scorching. High mounting pressure may cause problems like this, which is why I suggested it.