Mesh Wi-Fi points connected in a chain format
Mesh Wi-Fi points connected in a chain format
I'm having trouble getting a stable connection to my kitchen using the ISP router. I'm considering mesh systems but am unsure if a single additional point will work. I've seen setups with the router and two extenders, but I'm not sure about daisy chaining. The Google Nest Wi-Fi with two points is another option I'm thinking about. Any tips or recommended systems would be greatly appreciated.
They will link together in a series, but unless you obtain a package with a specific uplink transmitter, each transition reduces the available bandwidth at least by half and increases local network delay. Without a dedicated device, every unit using wireless uplink must rely on its single 5GHz transmitter for both sending to your gadgets and for communicating with other mesh nodes. Wireless signals operate in half-duplex mode, so only one device can transmit or listen at a time—not both. Each gadget can also send data only when no other device is using the same 5GHz channel nearby. With just one 5GHz unit, all mesh points share the same frequency for both uplink and client communication. This limits speed to roughly one-third to a quarter of the theoretical maximum, and latency can jump three or four times per hop instead of doubling. When a dedicated uplink is present, each wirelessly connected node has its own radio, allowing simultaneous sending and receiving on different channels. This reduces latency only by the time needed to resend packets, rather than doubling it, and limits speed drops mainly from increased delay. Another difference is that with a dedicated uplink, the link between mesh nodes stays stronger and faster, since each has a much more powerful transmitter than typical phones. This can push speeds above 700Mbps versus about 100-150Mbps for a standard connection. Because wireless is half-duplex, slower signals take longer to process, making it harder for laggy devices to catch up. This hurts performance on mesh networks without a dedicated radio, though it has little impact when one is present. For those needing reliable performance, Netgear Orbi is a solid choice—most Orbi devices include a dedicated uplink. For alternatives, investigate further; some brands label this as “tri-band,” but confirming whether a specific band is truly dedicated can be tricky. The 60GHz option is usually impractical for long-range mesh links.
I discovered this product and it's currently a good deal. Would you consider something similar?