Memory overclocking DDR3

F5F Stay Refreshed Power Users Overclocking Memory overclocking DDR3

Memory overclocking DDR3

Memory overclocking DDR3

D

darkspeed002
Member

143

12-05-2016, 06:20 AM

#1

Kingston HyperX savage 2400mhz CL11
XMP1 2400mhz 11,14,14,33 1.65v
XMP2 2133mhz 11,13,13,30 1.60v
Manual 2600mhz 12,14,14,33 1.65v
Just started with memory overclocking and someone suggested trying 2600mhz. It performed well with those settings. But can I push even further? I also needed to increase the voltage by 0.1v to get stable at 2600mhz. Would a higher CL offer greater speed?

D

darkspeed002

12-05-2016, 06:20 AM #1

Kingston HyperX savage 2400mhz CL11
XMP1 2400mhz 11,14,14,33 1.65v
XMP2 2133mhz 11,13,13,30 1.60v
Manual 2600mhz 12,14,14,33 1.65v
Just started with memory overclocking and someone suggested trying 2600mhz. It performed well with those settings. But can I push even further? I also needed to increase the voltage by 0.1v to get stable at 2600mhz. Would a higher CL offer greater speed?

D

DealWithSoti
Junior Member

28

12-10-2016, 07:49 AM

#2

Consider testing 2800 13-15-15-35 with a voltage of 1.65 and increasing the MC voltage by roughly +0.06. Likely outcome suggests it will affect either VCCIO or DDRVTT, possibly requiring higher CPU OC for 2800 as well.

D

DealWithSoti

12-10-2016, 07:49 AM #2

Consider testing 2800 13-15-15-35 with a voltage of 1.65 and increasing the MC voltage by roughly +0.06. Likely outcome suggests it will affect either VCCIO or DDRVTT, possibly requiring higher CPU OC for 2800 as well.

T

TheAvster
Member

66

12-10-2016, 04:00 PM

#3

I might attempt to restore the CL to version 11

T

TheAvster

12-10-2016, 04:00 PM #3

I might attempt to restore the CL to version 11

S

Shardgale
Senior Member

547

12-11-2016, 08:10 AM

#4

MasterMace would attempt to restore the CL back to 11
He has already tried
😉
but the CL11 wasn't stable at 2400mhz

S

Shardgale

12-11-2016, 08:10 AM #4

MasterMace would attempt to restore the CL back to 11
He has already tried
😉
but the CL11 wasn't stable at 2400mhz

D

DecoGamerEz
Member

212

12-15-2016, 06:54 PM

#5

Any other suggestions/tips?

D

DecoGamerEz

12-15-2016, 06:54 PM #5

Any other suggestions/tips?

I

ItzZain
Member

65

12-16-2016, 03:12 AM

#6

Consider testing 2800 13-15-15-35 with a voltage of 1.65 and increasing the MC voltage by roughly +0.06. Likely outcome suggests it will affect either VCCIO or DDRVTT, possibly requiring higher CPU OC for 2800 as well.

I

ItzZain

12-16-2016, 03:12 AM #6

Consider testing 2800 13-15-15-35 with a voltage of 1.65 and increasing the MC voltage by roughly +0.06. Likely outcome suggests it will affect either VCCIO or DDRVTT, possibly requiring higher CPU OC for 2800 as well.