memory frequency
memory frequency
so i got Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-4333 Memory
Timing: 19-26-26-46
CAS Latency: 19
what i got on BIOS -
tCL - 15
tRCDRD - 15
tRCDWR - 15
tRP - 15
tRAS - 36
the main question is how to enter the original timing and cas latency into the BIOS, because i don’t understand them. if you do, please enter them in the correct order, i shud enter it in bios.
Your MB only accommodates RAM speeds up to 3466:
https://www.msi.com/Motherboard/X470-GAM...cification
Therefore, enter the BIOS and activate the A-XMP Profile, but adjust the DRAM Frequency to 3200 (typically the maximum for a Ryzen 2000 series CPU).
If it boots at 3200, consider setting it to 3466.
If it boots at 3466, try 3600.
As CountMike mentioned, you likely won’t be able to exceed 3600 unless it supports that speed.
With those numbers, it's most probably running at base speed, 2133MHz.To get at rated XMP values you have to enable (A)XMP/DOCP profile in BIOS.. There's no guarantee you will get full speed of 4333MHz on that system.likely no more than 3600 MHz.
Your MB only accommodates RAM speeds up to 3466:
https://www.msi.com/Motherboard/X470-GAM...cification
Therefore, enter the BIOS and activate the A-XMP Profile, but adjust the DRAM Frequency to 3200 (typically the maximum for a Ryzen 2000 series CPU).
If it boots at 3200, consider setting it to 3466.
If it boots at 3466, try 3600.
As CountMike mentioned, you likely won’t be able to exceed 3600 unless it supports that speed.