Maximum data transfer rate limit imposed by the network.
Maximum data transfer rate limit imposed by the network.
I recently moved into a brand new apartment about six years ago. They said my internet should be fast—1gbp per second—but because of the building’s design, it’s limited to 100mb/s. I also have a poor rental modem and use a CAT5E cable. Upgrading those might help, but is it really possible for a recently built place? Thanks in advance.
It's unclear how the system functions in your area, but it's possible the ISP only covers lines up to your building, after which the apartment owns the remaining connections. It's unlikely the ISP provides direct service to each unit. Fiber will reach the complex, and then the building handles distribution. This could be due to the hardware or number of units needing setup. You might need to talk to your building manager for details. In most cases, you have limited options—consider reaching out to your provider to see if a cheaper plan is available.
Confirm this: based on what I know about internet delivery in Vancouver condos and apartments, I’d definitely discuss it with your building management. It seems someone mentioned the incoming lines support 1Gbit speeds, but each unit is likely limited to around 100mbit for even speed distribution across the building. This is usually managed by the building’s administration on the main account that feeds the building. In ISP terminology, this is called a bulk or tenant building setup. That means even if you have your own ISP plan, the rules apply to the entire building, so you might be restricted to a certain speed range despite the ISP offering higher packages. You could try negotiating with them or switching to a management that truly supports tenants. It’s not always easy, but sometimes you just need to keep looking.