Looking for RAM suggestions and a GPU inquiry.

Questiero
Member

215

12-07-2018, 05:20 PM

Hey there! Just a quick heads-up: you're in for a real learning curve with PC building. Comparing these RAM options means thinking about how they'll boost your system's speed and stability. Your setup looks solid—MSI Mortar B450 with Ryzen 5 2600 and an 8GB 2666MHz setup, plus two monitors with matching GPUs.

For performance, the 16GB 3200MHz G.Skill Trident Z Neo would likely give you a noticeable edge over the 16GB 3600MHz Klevv Cras X, especially if you're planning to run demanding games or multitask heavily. The higher clock speed helps with data transfer, which can improve responsiveness and overall gaming/filming performance.

Regarding your monitors: using two different GPUs for the main display (RX 580) and a secondary one (GT 630) is totally fine. Since both have similar specs, you won’t notice a big difference in performance between them. Just make sure your power supply and cooling can handle the load. If you remove the GT 630 and stick with the RX 580, you’ll save space but keep the same GPU configuration.

In short: go with the higher-speed 16GB 3200MHz RAM for better overall performance, and don’t stress about the monitor setup. You’re on the right track!

Questiero

12-07-2018, 05:20 PM #1

sniperboy650
Senior Member

735

12-08-2018, 01:54 AM

For a 2600 you need to opt for the 3200Mhz model.

sniperboy650

12-08-2018, 01:54 AM #2

For a 2600 you need to opt for the 3200Mhz model.

Zemboyy
Member

235

12-16-2018, 01:31 AM

Consider getting the Corsair Vengeance LP 2x8 at 3200MHz for a better price.

Zemboyy

12-16-2018, 01:31 AM #3

Consider getting the Corsair Vengeance LP 2x8 at 3200MHz for a better price.

biotit
Member

12-23-2018, 04:46 AM

Timings matter most. A 3600Mhz CL20 runs slower compared to a 3200Mhz CL16.

biotit

12-23-2018, 04:46 AM #4

Timings matter most. A 3600Mhz CL20 runs slower compared to a 3200Mhz CL16.

GERINGAS15
Member

12-24-2018, 11:54 PM

Hey everyone. Apologies for the confusion. Only these details are displayed for the specifications. Brand: Klevv Cooling Fin – Yes. Model Number: KLEVV CRAS-X. Function: NON-ECC Sequence – 16-18-18-38. Interface Type: 288-pin. Use Case: Desktop. Memory Type: DDR4. Capacity: 16GB (8GB x 2). Multi-Channel Kit: Dual Channel Kit. Tested Speed: 3200MHz. Tested Latency: 16-18-18-38. Tested Voltage: 1.35V. Registered/Unbuffered: Unbuffered. Error Checking: Non-ECC. SPD Speed: 2133MHz. SPD Voltage: 1.20V. Fan Included: Yes. No Features: Intel XMP 2.0 (Extreme Memory Profile). Additional Notes: Rated XMP frequency & stability depends on MB and CPU capability. I'm really sorry. This is what I found from the online page.

GERINGAS15

12-24-2018, 11:54 PM #5

vidi8
Junior Member

12-26-2018, 12:40 PM

Klevv details
Trident Z specifications

vidi8

12-26-2018, 12:40 PM #6

Klevv details
Trident Z specifications

ChaosC39
Junior Member

12-27-2018, 10:51 PM

3600 offers superior performance but won’t run smoothly on a 2600. For simplicity, choose the 3200MHz model; for extra speed, opt for the 3600MHz and adjust it down to 3200MHz manually.

ChaosC39

12-27-2018, 10:51 PM #7

3600 offers superior performance but won’t run smoothly on a 2600. For simplicity, choose the 3200MHz model; for extra speed, opt for the 3600MHz and adjust it down to 3200MHz manually.

LoVe_SpY_GirL
Junior Member

12-28-2018, 03:48 AM

I possess these HyperX FURY HX432C18FB2K2/16 DDR4 16 GB (kit 2 x 8 GB) with 3200 MHz CL18 DIMM and XMP support, yet they lack RGB lighting.

LoVe_SpY_GirL

12-28-2018, 03:48 AM #8

I possess these HyperX FURY HX432C18FB2K2/16 DDR4 16 GB (kit 2 x 8 GB) with 3200 MHz CL18 DIMM and XMP support, yet they lack RGB lighting.