Looking for overclock specifications for a Gigabyte X570 Aorus Ultra?
Looking for overclock specifications for a Gigabyte X570 Aorus Ultra?
I need the overclock specifications for a Gigabyte X570 Aorus Ultra. I aim for a 4.50 GHZ performance. I currently have a Ryzen 9 5950 16 core water cooled unit. I haven’t found any information about this combination online.
Right now, I’m using the PBO and Ram clock settings only. I’m a beginner again. I’ve overclocked my previous PCs but stopped when laptops became popular. Now I want to upgrade back to a desktop for better performance.
My age is around 62 or 63 years old—really hard to grasp! I also struggle with manually adjusting a computer’s speed.
Also, I have AMD Ryzen Master installed and tried Auto Overclock, but the stress test lasted only a short time. The system would randomly restart while running Windows, so I relied on PBO and RAM instead.
I also have a question about PBO: if manual overclocking is enabled, should I disable it?
Thanks for reading and helping me.
Based on my experience, the simplest method to manually adjust all clocks to the target value is by turning off any PBO settings, disabling AMD Cool N Quiet in the BIOS, setting the CPU voltage to 1.35 or 1.4 maximum, and adjusting the multiplier/frequency to the desired level. Before reaching the target, attempt to stabilize at 4.2 and increase frequency gradually until it remains stable during a stress test. This process may take time but is manageable. Personally, I prefer using AIDA Stress FPU because it’s more efficient than stressing just the FPU with Prime95 Smallest for extended periods.
Based on my experience, the simplest method to manually adjust all clocks to the target value is by turning off any PBO settings, disabling AMD Cool N Quiet in the BIOS, setting the CPU voltage to 1.35 or 1.4 maximum, and adjusting the multiplier/frequency to the desired setting. Before reaching the target, try 4.2 and increase frequency gradually until it stabilizes at the desired rate. Once stable, slowly lower the voltage until you encounter instability or crashes during a stress test—this step may take some time. Personally, I use AIDA Stress FPU only (as stressing just the FPU is very demanding) or run Prime95 Smallest with FFT for an extended period. Attempt to reach stability using Ryzen Master, and when you find a stable 4.5GHz across all cores, apply the core voltage value in the BIOS and enjoy.
Also perhaps when adjusting Ryzen Master settings, the same configuration might behave differently in Bios. Many people say that if Ryzen Master OC settings work fine but you prefer lower voltage, changing the BIOS is quite stable. It seems to be the most consistent option once you've identified the best setting in Ryzen Master. It's essentially a trial and error process, and maybe you'll succeed by reaching 4.5ghz at lower voltages.
I primarily use my 5950X for Handbrake BD and 4K encoding - this is multi-thread, compute intensive work that will run for hours at 70%-90%+ CPU utilization.
PBO is ineffective and runs hot. I've settled on disabling all PBO and setting an all-core OC at 4.525GHz with a maximum voltage of 1.28v and average (over several hours) of 1.20v.
This is on an ASUS ROG Crosshair VIII formula. I don't know that my CPU is unique (I'm never lucky), I do know that X570 defaults seem to throw voltages all over the place so setting fixed/offset voltages can have benefits.
FWIW - I'm 67...