Looking for information on the RGB settings of Corsair Vengeance PRO?

F5F Stay Refreshed Hardware Desktop Looking for information on the RGB settings of Corsair Vengeance PRO?

Looking for information on the RGB settings of Corsair Vengeance PRO?

Looking for information on the RGB settings of Corsair Vengeance PRO?

M

Mispisek
Member

177

12-18-2016, 11:37 AM

#1

I’ve dealt with a similar issue on a ROG B450F setup. The RAM slots were filled with Corsair Vengeance RGB sticks at 3200mhz, but after installation the lighting didn’t respond properly. Initially, one stick lit up when the PC started, yet the other stayed off despite the system detecting both. After some restarts and adjusting settings, both LEDs eventually synchronized correctly thanks to Aura and iCUE. However, one RAM slot was showing the opposite direction—moving bottom to top instead of the expected top to bottom. It’s frustrating when you invest time but the hardware doesn’t cooperate. If you need help resolving this, let me know!

M

Mispisek

12-18-2016, 11:37 AM #1

I’ve dealt with a similar issue on a ROG B450F setup. The RAM slots were filled with Corsair Vengeance RGB sticks at 3200mhz, but after installation the lighting didn’t respond properly. Initially, one stick lit up when the PC started, yet the other stayed off despite the system detecting both. After some restarts and adjusting settings, both LEDs eventually synchronized correctly thanks to Aura and iCUE. However, one RAM slot was showing the opposite direction—moving bottom to top instead of the expected top to bottom. It’s frustrating when you invest time but the hardware doesn’t cooperate. If you need help resolving this, let me know!

9

905xA
Senior Member

667

12-18-2016, 08:03 PM

#2

I adjusted the layout in the icon and confirmed the firmware is current. I remember having that problem before, but it’s been a while.

9

905xA

12-18-2016, 08:03 PM #2

I adjusted the layout in the icon and confirmed the firmware is current. I remember having that problem before, but it’s been a while.

K

Killa_Dx
Senior Member

645

12-19-2016, 04:14 AM

#3

slowly test each one at a time and observe the outcome

K

Killa_Dx

12-19-2016, 04:14 AM #3

slowly test each one at a time and observe the outcome