Looking for guidance on configuring your router as a repeater?
Looking for guidance on configuring your router as a repeater?
I need to configure your TP-Link Archer D9 as a repeater. The main router you have from your ISP offers WDS bridging, which can help extend your Wi-Fi coverage. Check the settings for the secondary router and adjust the WDS parameters accordingly. Make sure to set the default gateway of the main router to 192.168.29.1.
Hello, the page you found on TP-Link's FAQ appears to match Case 2. It mentions needing your TP-Link connected via Ethernet to your ISP's router. Without certain third-party firmware (which this model doesn't support), I doubt it can handle receiving and rebroadcasting a WiFi SSID.
I recognize this situation, but I’m uncertain about your ability to use it with the product. The Archer D9 is primarily a DSL modem with router features. It’s highly improbable that TP-link produced it for this role. Its website also states it’s at the end of its life and won’t get any more updates, making it insecure to keep on your network. It’s possible an older firmware version enabled AP or repeater mode, but without those features now, the device can’t detect incoming SSIDs. It can broadcast one, but it won’t connect to your network. I believe you should consider another device designed for this use instead of using an outdated, insecure model. If you manage to locate compatible third-party firmware, that might resolve the issue.
The second image displays the WDS bridging enable button. I’m not entirely clear on the configuration yet. Be aware this may cut your bandwidth in half for clients linked through the TP Link router, mainly due to wireless bridging or repeater settings. Place the TP Link router in an area with strong signal strength. If it’s near the edge of coverage, speeds will drop significantly.