F5F Stay Refreshed Power Users Overclocking Looking for assistance with boosting an I5 2500K?

Looking for assistance with boosting an I5 2500K?

Looking for assistance with boosting an I5 2500K?

M
MarvelGirlLily
Junior Member
11
09-11-2016, 11:39 PM
#1
Hey everyone, I'm just starting out with overclocking and don't want to mess up my setup. I have a 2500k processor and an ASUS P8P67 LE, and I'm curious if I can achieve a steady OC at around 4.5 Ghz. My case is the Tesseract, it has two fans, and my CPU cooler is the Hyper 212 Evo.
M
MarvelGirlLily
09-11-2016, 11:39 PM #1

Hey everyone, I'm just starting out with overclocking and don't want to mess up my setup. I have a 2500k processor and an ASUS P8P67 LE, and I'm curious if I can achieve a steady OC at around 4.5 Ghz. My case is the Tesseract, it has two fans, and my CPU cooler is the Hyper 212 Evo.

C
Cirrus721
Junior Member
2
09-17-2016, 07:28 AM
#2
There are various test tools that can show your voltage. CPUz and speedfan work well. You might also find the voltage listed in the BIOS.
http://www.cpuid.com/softwares/cpu-z.html
http://www.almico.com/speedfan.php
C
Cirrus721
09-17-2016, 07:28 AM #2

There are various test tools that can show your voltage. CPUz and speedfan work well. You might also find the voltage listed in the BIOS.
http://www.cpuid.com/softwares/cpu-z.html
http://www.almico.com/speedfan.php

M
Mr_Ragez
Junior Member
18
09-17-2016, 10:34 AM
#3
It would be a significant overclock for the 2500k, but feasible. You need to understand how to reset your BIOS in case your overclock exceeds the safe voltage range. It's best to check how far you can push without raising the voltage. Aim to keep it below 1.35v and not exceed 1.4v. Beyond that, I doubt the CM212 will handle it.
M
Mr_Ragez
09-17-2016, 10:34 AM #3

It would be a significant overclock for the 2500k, but feasible. You need to understand how to reset your BIOS in case your overclock exceeds the safe voltage range. It's best to check how far you can push without raising the voltage. Aim to keep it below 1.35v and not exceed 1.4v. Beyond that, I doubt the CM212 will handle it.

M
MessiasCraft
Member
153
09-18-2016, 09:49 PM
#4
It would be a big jump for the 2500k but feasible. You need to understand how to reset your BIOS in case your overclock is too high for your voltage. Check how far you can push without raising the voltage, aiming for under 1.35v and not exceeding 1.4v. Any higher and the CM212 might struggle.
M
MessiasCraft
09-18-2016, 09:49 PM #4

It would be a big jump for the 2500k but feasible. You need to understand how to reset your BIOS in case your overclock is too high for your voltage. Check how far you can push without raising the voltage, aiming for under 1.35v and not exceeding 1.4v. Any higher and the CM212 might struggle.

D
dat_random_kid
Junior Member
29
10-07-2016, 12:18 PM
#5
There are various test tools that can show your voltage. CPUz and speedfan work well. You might also find the voltage listed in the BIOS.
http://www.cpuid.com/softwares/cpu-z.html
http://www.almico.com/speedfan.php
D
dat_random_kid
10-07-2016, 12:18 PM #5

There are various test tools that can show your voltage. CPUz and speedfan work well. You might also find the voltage listed in the BIOS.
http://www.cpuid.com/softwares/cpu-z.html
http://www.almico.com/speedfan.php

I
IronDab
Junior Member
3
10-07-2016, 12:40 PM
#6
Because you're likely to face temperature issues, begin with a fixed 1.35 vcore and gradually increase the multiplier until the stress test reaches its limits. When temperatures become excessive, reduce the vcore in increments of 0.1 and consider boosting the clock speed slightly. Run without XMP enabled initially to assess your system's performance. I used a similar motherboard on my 2500k and experimented with higher LLC settings; voltage drops significantly under load, causing instability even if temperatures stayed acceptable. For reference, I achieved 4.5Ghz with 1.3vcore, maximum LLC, and stress temperatures around 65°C—this was using an all-in-one liquid cooler. I pushed it to 5.04Ghz (49x multiplier, higher clock) with 1.415vcore, but long-term temps were concerning (85°C under stress, about 70°C during gaming). It seems my chip performed better in that case. Good luck!
I
IronDab
10-07-2016, 12:40 PM #6

Because you're likely to face temperature issues, begin with a fixed 1.35 vcore and gradually increase the multiplier until the stress test reaches its limits. When temperatures become excessive, reduce the vcore in increments of 0.1 and consider boosting the clock speed slightly. Run without XMP enabled initially to assess your system's performance. I used a similar motherboard on my 2500k and experimented with higher LLC settings; voltage drops significantly under load, causing instability even if temperatures stayed acceptable. For reference, I achieved 4.5Ghz with 1.3vcore, maximum LLC, and stress temperatures around 65°C—this was using an all-in-one liquid cooler. I pushed it to 5.04Ghz (49x multiplier, higher clock) with 1.415vcore, but long-term temps were concerning (85°C under stress, about 70°C during gaming). It seems my chip performed better in that case. Good luck!

Y
Yokijirou
Member
134
10-07-2016, 01:50 PM
#7
The question about LLC is already addressed.
Y
Yokijirou
10-07-2016, 01:50 PM #7

The question about LLC is already addressed.

S
Sir_Flexo
Member
164
10-11-2016, 02:16 PM
#8
It is a configuration to address Vdroop, a decrease in CPU voltage when the load rises.
S
Sir_Flexo
10-11-2016, 02:16 PM #8

It is a configuration to address Vdroop, a decrease in CPU voltage when the load rises.