Long startup on Windows 10 device.
Long startup on Windows 10 device.
Hey everyone, I've noticed my new system is running a bit sluggish when it starts up. The specs are all standard, but the boot time feels longer than expected. I'm trying to speed things up, especially using sleep mode, but it still takes around 13 seconds to wake up after powering down. I've used sleep mode before and got instantaneous starts, but my PC doesn't respond that fast. Would anyone have suggestions for improving this?
I might encounter similar issues with my Samsung 850 EVO SSD, which boots in roughly 17-18 seconds according to Task Manager's BIOS time. Since I don’t use sleep mode, I’m unsure of the exact speed. The rest of the specifications are available, but this seems like a recognized "Ryzen problem" based on what I’ve heard.
I verified and then turned it off and back on to obtain a second measurement, which remained consistent at 27.0 seconds each time.
It isn't Windows. The BIOS seems to be lagging. Consider resetting the CMOS by taking out and putting back in the CMOS battery on your motherboard. It's roughly the size of a US quarter.
Your setup operates under UEFI, and it’s fully compatible with this architecture. Assuming no extra hardware or devices are problematic, verify your UEFI settings: (ensure UEFI mode is active, avoid Legacy or Compatibility options; consider labels like "Windows 8 WHQL Support" or similar). Disable X.M.P profile, enable Fast Boot if available, and set Startup Delay to zero or off. Configure SATA controllers for AHCI mode. Remove unused peripherals such as extra SATA cards or secondary Ethernet adapters. Secure Boot should be turned on for security, but avoid unnecessary features. Set boot priority to your SSD (assuming Windows is installed). If you must choose between "UEFI [SSD name]" and another name, select the one with UEFI. Turn off network booting.
Keep in mind: HDDs can delay startup because UEFI requires time to initialize them. Dedicated graphics often boot faster than integrated ones, but this isn’t always measured accurately. Avoid using graphics cards that slow down the process; they may not be tested for boot times by manufacturers.
If your UEFI is misconfigured, you might encounter issues like being unable to boot or needing a full drive wipe due to MBR-to-GPT conversion. Try switching to Legacy mode temporarily and see if it resolves problems.
For safer browsing, stick with Windows Defender—the built-in antivirus won’t interfere with boot performance. Limit startup programs and services that can slow access to your account.
Disconnect the HDD SATA cable and observe whether it improves your startup time.
I recently came across a Reddit thread discussing MSI AM4 boards. It seems they boot slowly, requiring a BIOS update. Still, it’s good to know my setup isn’t problematic.