Long beep followed by three short sounds. Attempted to reposition still without success, require assistance.
Long beep followed by three short sounds. Attempted to reposition still without success, require assistance.
Hi guys ..
I moved the PC from one corner of the room to another (the PC is on the cart).
After plugging it back in, I heard one long and three short beeps during startup, no display. Before that, it always worked for more than two years.
I tried reseating the GPU RTX 4070Ti many times, but still no success.
Also, the GPU seems a bit big and heavy—it looks a little sagged... but laying my PC flat didn’t change anything.
Then I took the GPU and RAM out completely from the case and turned the PC back on. Now I get continuous long 3 short beeps.
With RAM in and GPU in, it only gives one long 3 short beeps during startup.
Does this mean the motherboard is okay? Any suggestions?
Share your specifications so others can assist you better. Have you experimented with connecting the GPU properly using the correct wires, ensuring the RAM is seated correctly, and testing one stick at a time to verify the RAM isn<|pad|>. If your GPU is sagging, you can purchase support brackets online to secure it and prevent further sagging. Amazon offers sag brackets.
I7 10700k
Asus Z590-P
Corsair 32G ram
RTX GeForce 4070TI
PSU( Corsair RM850x)
This build was completed in summer 2021. I will test the RAM, but... it worked fine yesterday. I let you know.
1 Long 3 short beeps might indicate no VGA detected (this applies to other ASUS boards, and I haven't found the table for your setup yet).
Fixed.. man.. I was bothering you guys
Learned my Monitor cable wasn't inserted properly .. LoL.. have to pay attention..
Thanks a lot, guys!